User manual SHARP XL-HP500H

[. . . ] MIKRO KOMPONENTEN SYSTEM MICRO-CHANE SISTEMA MICRO MIKRO KOMPONENT SYSTEM MICRO SISTEMI MICRO SYSTEEM SISTEMA DE MICRO COMPONENTE MICRO COMPONENT SYSTEM MODELL MODLE MODELO MODELL MODELLO MODEL MODELO MODEL Mikro Komponenten System XL-HP500H besteht aus XL-HP500H (Hauptgert) und CP-HP500H (Lautsprecher-System). Micro-chane XL-HP500H compose de XL-HP500H (appareil principal) et de CP-HP500H (enceintes acoustiques). Sistema micro XL-HP500H que consta de XL-HP500H (unidad principal) y CPHP500H (sistema de altavoces). XL-HP500H mikro komponent system bestende av XL-HP500H (huvudenhet) och CP-HP500H (hgtalarsystem). [. . . ] Do not play discs with special shapes (heart- or octagonshaped). Do not push the disc tray whilst it is moving. If the power fails whilst the tray is open, wait until the power is restored. If the disc tray is stopped forcibly, "ER-CD20" will appear on the display for 3 seconds and the unit will not function. If this occurs, press the ON/STAND-BY button to enter the power stand-by mode and then turn the power on again. If TV or radio interference occurs during CD operation, move the unit away from the TV or radio. If a disc is damaged, dirty, or loaded upside down, the disc will skip. " To locate the desired portion For audible fast forward: Press and hold down the For audible fast reverse: Press and hold down the button during playback. button during playback. Notes: or button is re!Normal playback will resume when the leased. You can locate the desired portion on a single disc only. When the end of the last track is reached during fast forward, " END" will appear on the display and CD operation will be paused. When the beginning of the first track is reached during fast reverse, the unit will enter the playback mode. ( : Last track number) CD Playback 8 E-12 02/7/23 XL-HP500H(H)E2. fm XL-HP500H Advanced CD playback " Direct search of the track By using the direct search buttons, the desired tracks on the current disc can be played. Use the direct search buttons on the remote control to select the desired track whilst playing the selected disc. The direct search buttons allow you to select up to number 10. When selecting number 11 or more, use the "+10" button. ENGLISH " Repeat play All tracks on up to 3 discs, all tracks on the chosen disc or a programmed sequence can be continuously repeated. To repeat all tracks on up to 3 discs: Press the / button twice. To repeat all tracks on the chosen disc: 1 Press one of the DISC SELECT - ( 1 - 3) buttons. To repeat desired tracks: Perform steps 1 - 6 in the "Programmed play" section and then press the / button twice. To cancel repeat play: Press the / button again. " " will go out. CD Playback A. For example, to choose 13 1 Press the "+10" button once. [. . . ] 1 2 Press the ON/STAND-BY button to enter the power stand-by mode. Whilst pressing down the / button and the X-BASS/DEMO button, press the ON/STAND-BY button until "CLEAR AL" appears. ENGLISH " If trouble occurs When this product is subjected to strong external interference (mechanical shock, excessive static electricity, abnormal supply voltage due to lightning, etc. ) or if it is operated incorrectly, it may malfunction. If such a problem occurs, do the following: 1 Set the unit to the stand-by mode and turn the power on again. 2 If the unit is not restored in the previous operation, unplug and plug in the unit, and then turn the power on. [. . . ]