User manual SHARP XL-HP700H

[. . . ] MIKRO KOMPONENTEN SYSTEM MICRO-CHANE SISTEMA MICRO MIKRO KOMPONENT SYSTEM MICRO SISTEMI MICRO SYSTEEM SISTEMA DE MICRO COMPONENTE MICRO COMPONENT SYSTEM MODELL MODLE MODELO MODELL MODELLO MODEL MODELO MODEL Mikro Komponenten System XL-HP700H besteht aus XL-HP700H (Hauptgert) und CP-HP700H (Lautsprecher-System). Micro-chane XL-HP700H compose de XL-HP700H (appareil principal) et de CP-HP700H (enceintes acoustiques). Sistema micro XL-HP700H que consta de XL-HP700H (unidad principal) y CPHP700H (sistema de altavoces). XL-HP700H mikro komponent system bestende av XL-HP700H (huvudenhet) och CP-HP700H (hgtalarsystem). [. . . ] Position the AM loop aerial for optimum reception. Place the AM loop aerial on a shelf, etc. , or attach it to a stand or a wall with screws (not supplied). Note: Placing the aerial on the stereo system or near the AC power lead may cause noise pickup. Place the aerial away from the stereo system for better reception. Installing the AM loop aerial: < Assembling > Preparation for Use < Attaching to the wall > Wall Wall socket (AC 230 V, 50 Hz) Screws (not supplied) External FM aerial: Use an external FM aerial if you require better reception. Consult your dealer. External FM aerial Red Black Red Black E-7 02/7/22 XL-HP700H(H)E1. fm XL-HP700H !Speaker connection Connect the black wire to the minus (-) terminal, and the red wire to the plus (+) terminal. Caution: " Connect the speaker wires to the speakers first, then to the unit. " Use speakers with an impedance of 6 ohms or more, as lower impedance speakers can damage the unit. " Do not mistake the right and the left channels. The right speaker is the one on the right side when you face the unit. " Do not let the bare speaker wires touch each other. " Do not allow any objects to fall into or to be placed in the bass reflex ducts. " Do not stand or sit on the speakers. You may be injured. ENGLISH Notes: " The unit will start the tape initialisation when plugged in to the AC socket. During this process, initialising sound will be heard and the unit cannot be turned on. " Unplug the AC power lead from the wall socket if the unit will not be in use for a prolonged period of time. !Demonstration mode The first time the unit is plugged in, the unit will enter the demonstration mode. You will see words scroll. To return to the demonstration mode: When the unit is in the power stand-by mode, press the X-BASS/ DEMO button again. Note: When the power is on, the X-BASS/DEMO button can be used to select the extra bass mode. Incorrect Speaker grilles are removable: Make sure nothing comes into contact with the speaker diaphragms when you remove the speaker grilles. Incorrect !Connecting the AC power lead After checking all the connections have been made correctly, plug the AC power lead of this unit into the wall socket. If you plug in the unit first, the unit will enter the demonstration mode. [. . . ] 1 2 Press the ON/STAND-BY button to enter the power stand-by mode. Whilst pressing down the / button and the X-BASS/DEMO button, press the ON/STAND-BY button until "CLEAR AL" appears. ENGLISH " If trouble occurs When this product is subjected to strong external interference (mechanical shock, excessive static electricity, abnormal supply voltage due to lightning, etc. ) or if it is operated incorrectly, it may malfunction. If such a problem occurs, do the following: 1 Set the unit to the stand-by mode and turn the power on again. 2 If the unit is not restored in the previous operation, unplug and plug in the unit, and then turn the power on. [. . . ]