User manual SHARP XL-MP10H

[. . . ] MIKRO KOMPONENTEN SYSTEM MICRO-CHANE SISTEMA MICRO MIKRO KOMPONENT SYSTEM MICRO SISTEMI MICRO SYSTEEM SISTEMA DE MICRO COMPONENTE MICRO COMPONENT SYSTEM MODELL MODLE MODELO MODELL MODELLO MODEL MODELO MODEL Mikro Komponenten System XL-MP10H besteht aus XL-MP10H (Hauptgert) und CP-S10H (Lautsprechersystem). Micro-chane XL-MP10H compose de XL-MP10H (appareil principal) et CP-S10H (enceinte acoustique). Sistema micro XL-MP10H que consta de XL-MP10H (aparato principal) y CP-S10H (sistema de altavoces). XL-MP10H mikro komponent system bestende av XL-MP10H (huvudenhet) och CP-S10H (hgtalarsystem). [. . . ] Hold it down to advance continuously. 4 Within 1 minute, press the PRESET ( or ) button to adjust the minutes and then press the MEMORY button. This may be operated only with the remote control. In this example, the clock is set for the 24-hour (0:00) display. Press the PRESET ( or ) button once to advance the time by 1 minute. To confirm the time display: Press the CLOCK button. The time display will appear for about 5 seconds. Note: The "0:00" or time will flash when the AC power supply is restored after a power failure or unplugging the unit. To readjust the clock: Perform "Setting the clock" from the beginning. If the "0:00" is not flashing in step 1, step 2 (for selecting the 24-hour or 12-hour display) will be skipped. To change the 24-hour or 12-hour display: 1 Clear all the programmed contents. [Refer to "Clearing all the memory (reset)" on page 23 for details. ] 2 Perform "Setting the clock" from the beginning. 1 Press the CLOCK button and within 5 seconds, press the MEMORY button. 2 Within 1 minute, press the PRESET ( or ) button to select 24-hour or 12-hour display and then press the MEMORY button. "0:00" "AM 12:00" The 24-hour display will appear. (0:00 - 23:59) The 12-hour display will appear. (AM 12:00 - PM 11:59) Basic Operation SHARP TINSZA033SJZZ (H) 8 E-8 04/11/1 XL-MP10H(H)E1. fm TINSZA033SJZZ XL-MP10H Listening to a disc This system can play back a standard CD, CD-R/RW in the CD format and CD-R/RW with MP3 or WMA files, but cannot record on them. Some audio CD-R and CD-RW discs may not be playable due to the state of the disc or the equipment used for recording. It is an acronym which stands for MPEG Audio Layer 3. MP3 is a type of audio code which is processed by significant compression from the original audio source with very little loss in sound quality. " The MP3 track indicator will light up when an MP3 track is read. " This system supports MPEG 1 Layer 3, MPEG 2 Layer 3, and VBR files. " During VBR file playback, time counter in the display may differ from its actual playback time. WMA: WMA files are ASF (Advanced Systems Format) audio files which are compressed with Windows Media Audio codec. WMA is developed by Microsoft as an audio format file for Windows Media Player. " The WMA track indicator will light up when a WMA track is read. " Supported bit rates for WMA files range from 64 kbps to 160 kbps. ENGLISH E-9 Disc Playback 04/11/1 XL-MP10H(H)E1. fm TINSZA033SJZZ XL-MP10H ENGLISH 1 2 3 4 Press the ON/STAND-BY button to turn the power on. Press the FUNCTION button until "CD DISC" appears on the display. [. . . ] If fingerprints or dust accumulate on the pickup, clean it gently with a dry cotton swab. 13 !Cleaning the cabinet Periodically wipe the cabinet with a soft cloth and a diluted soap solution, then with a dry cloth. Caution: " Do not use chemicals for cleaning (petrol, paint thinner, etc. ). " Do not apply oil to the inside of the unit. [. . . ]