User manual SHARP XL-MP150H

[. . . ] MIKRO KOMPONENTEN SYSTEM MICRO-CHANE SISTEMA MICRO MIKRO KOMPONENT SYSTEM MICRO SISTEMI MICRO SYSTEEM SISTEMA DE MICRO COMPONENTE MICRO COMPONENT SYSTEM MODELL MODLE MODELO MODELL MODELLO MODEL MODELO MODEL Mikro Komponenten System XL-MP150H besteht aus XL-MP150H (Hauptgert) und CP-MP150H (Lautsprecher-system). Micro-chane XL-MP150H compose de XL-MP150H (appareil principal) et de CP-MP150H (enceinte acoustique). Sistema micro XL-MP150H que consta de XL-MP150H (aparato principal) y CPMP150H (sistema de altavoces). XL-MP150H mikro komponent system bestende av XL-MP150H (huvudenhet) och CP-MP150H (hgtalarsystem). [. . . ] If you press the button in the stop mode, press the / button to start the desired track. Press and hold down in the playback mode. Release the button to resume playback. To change the display (MP3/WMA discs only) Whilst a disc is playing, press the DISPLAY button. Each time the button is pressed, the display will change as follows. Track number Elapsed playback time Folder name File name E-15 Advanced CD or MP3/WMA disc playback To specify a disc to play You can play a disc by specifying the disc number. XL-MP150H Direct track search By using the direct search buttons, the desired tracks on the current disc can be played. Use the direct search buttons on the remote control to select the desired track whilst playing the selected disc. ENGLISH 1 Press one of the 1- 5 buttons to select the desired disc. Selected disc number 2 Within 5 seconds, press the CD DIRECT PLAY button on the main unit. The direct search buttons allow you to select up to number 9. When selecting number 10 or higher, use the "+10" button. For example, to choose 13 1 Press the "+10" button once. 2 Press the "3" button. / ASPM PTY. TI SEARCH B. For example, to choose 30 1 Press the "+10" button three times. If the direct search buttons are pressed whilst the disc is stopped, press the / button to start the desired track on the current disc. Notes: A track number higher than the number of tracks on the disc cannot be selected. During random play, direct search is not possible. DISPLAY MODE Playback will begin from track 1 on the chosen disc. After the last track on the chosen disc is played, the unit stops automatically. Note: If a disc tray with no disc is selected, playback will not start and the disc indicator will go out. To stop playback: Press the (CD ) button. CD or MP3/WMA disc Playback Selected track number 8 E-16 XL-MP150H Advanced CD or MP3/WMA disc playback (continued) Repeat play Repeat play can play all 5 discs, all tracks on a chosen disc, or a programmed sequence continuously. To repeat all tracks on up to 5 discs: Press the / button twice. To repeat desired tracks: Perform steps 1 - 6 in "Programmed play" section on page 18 and then press the / button twice. To cancel random play: Press the / button. To random play all tracks on the chosen disc: 1 Press one of the 1 - 5 buttons. 2 Within 5 seconds, press the CD DIRECT PLAY button. 3 Press the RANDOM button on the remote control. To cancel random play: Press the CD DIRECT PLAY button. [. . . ] Carrying the unit with discs left inside can damage the unit. E-47 Specifications As part of our policy of continuous improvement, SHARP reserves the right to make design and specification changes for product improvement without prior notice. The performance specification figures indicated are nominal values of production units. There may be some deviations from these values in individual units. XL-MP150H CD player Type Signal readout D/A converter Frequency response Dynamic range 5-disc multi-play compact disc player Non-contact, 3-beam semiconductor laser pickup 1-bit D/A converter 20 - 20, 000 Hz 90 dB (1 kHz) ENGLISH General Power source Power consumption Dimensions AC 230 V, 50 Hz Power on:100 W Power stand-by: 0. 6 W(*) Width: 185 mm (7-1/4") Height: 260 mm (10-1/4") Depth: 307 mm (12") 6. 1 kg (13. 4 lbs. ) Tuner Frequency range FM: 87. 5 - 108 MHz AM: 522 - 1, 620 kHz Weight ( * )This power consumption value is obtained when the demonstration mode is cancelled in the power stand-by mode. Refer to page 9 to cancel the demonstration mode. Cassette deck Frequency response Signal/noise ratio Wow and flutter 50 - 14, 000 Hz (normal tape) 50 dB (recording/playback) 0. 35 % (DIN 45 511) Amplifier Output power PMPO: 752 W (total) MPO: 376 W (188 W + 188 W) (DIN 45 324) RMS: 200 W (100 W + 100 W) (DIN 45 324) RMS: 160 W (80 W + 80 W) (DIN 45 500) Speakers: 6 ohms Headphones: 16 - 50 ohms (recommended: 32 ohms) Subwoofer pre-out (audio signal): 200 mV/10 k ohms at 70 Hz Video/Auxiliary (audio signal): 500 mV/47 k ohms USB input: USB type Speaker Type 2-way type speaker system 5 cm (2") tweeter 13 cm (5-1/8") woofer 200 W 100 W 6 ohms Width: 185 mm (7-1/4") Height: 260 mm (10-1/4") Depth: 260 mm (10-1/4") 3. 1 kg (6. 8 lbs. )/each Output terminals Input terminals Maximum input power Rated input power Impedance Dimensions References Weight 8 E-48 CONSUMER LIMITED WARRANTY SHARP ELECTRONICS CORPORATION warrants to the first consumer purchaser that this Sharp brand product (the "Product"), when shipped in its original container, will be free from defective workmanship and materials, and agrees that it will, at its option, either repair the defect or replace the defective Product or part thereof with a new or remanufactured equivalent at no charge to the purchaser for parts or labor for the period(s) set forth below. [. . . ]