User manual SHARP XL-MP2

[. . . ] XL-MP2H Micro Component System consisting of XL-MP2H (main unit) and CP-MP2H (speaker system). MICRO COMPONENT SYSTEM MODEL XL-MP2H OPERATION MANUAL SHARP CORPORATION XL-MP2H ENGLISH Special notes WARNINGS When the ON/STAND BY button is set at STAND-BY position, mains voltage is still present inside the unit. When the ON/STAND BY button is set at STAND-BY position, the unit may be brought into operation by the timer mode or remote control. This unit contains no user serviceable parts. Never remove covers unless qualified to do so. [. . . ] In random play, the unit will select and play tracks automatically. (You cannot select the order of the tracks. ) During random play, repeat function is not possible. In random function, playback will stop after all the tracks is played randomly. Caution: After performing repeat, be sure to press the Otherwise, it will play continuously. button. 1 FOLDER 1 WMA MP3 REPEAT CD or MP3/WMA disc Playback Each time press the button, the repeat mode changes in the following order: In case of an audio CD mode: Repeat playback of a single track 1 Repeat playback of all tracks on the disc Repeat playback of folder on the disc when in folder mode Folder Repeat playback is cancelled Note: ( ) When in folder mode, the selected playmode can be used for the files in the selected folder only. Notes: This unit only supports "MPEG-1 Audio Layer-3" format. (Sampling Frequency is 32, 44. 1, 48kHz) "MPEG-2 Audio Layer-3", "MPEG-2. 5 Audio Layer-3" and MP1, MP2 format are not supported. Playback order for MP3 files may differ sometimes depending on the writing software used during file download. Bitrate which is supported by MP3 is 32~320 kbps, WMA is 64~160 kbps. For MP3/WMA files, please put ". MP3" ". WMA" extension. Files cannot be played back if there is no MP3/WMA extension. Playlists are not supported on this unit. This unit only supports MP3 ID3-Tag version 1. x. The display playback time may not be displayed correctly when playing back a variable bitrate file. WMA meta tag also supports title, artist and album name which are recorded in WMA files. Copyright protected WMA files cannot be played back. Random play (REMOTE CONTROL ONLY) The tracks on the disc(s) can be played in random order automatically. To random play all tracks: Press the RANDOM button on the remote control so that the random indicator light up in the display window. RANDOM FOLDER MP3 RANDOM E-15 XL-MP2H ENGLISH Programmed play 1 Whilst in the stop mode, press the MEMORY/DISP button to enter the programming save mode. MEMORY TRACK CD To cancel the programmed play mode: During programmed stop mode, press the MEMORY/DISP button and press the button or STOP button on the remote control. The display will show "CLEAR" and all the programmed contents will be cleared. Notes: If the disc lid is opened, the programmed sequence will be cancelled. The programme will automatically cancelled if you press the ON/ STAND-BY button to enter the stand-by mode or change the function from CD to another. During the programme operation, press the RANDOM button will automatically cancelled the programme. CD STOP PRESET 2 Press the direct search buttons on the remote control to select the desired tracks. MEMORY TRACK CD You can also select a track by pressing the button. or 1 2 3 4 MEMORY/ DISP 3 Press the MEMORY/DISP button to save the track number. MEMORY TRACK CD 5 6 7 8 9 0 +10 4 5 Repeat steps 2 ­ 3 for other tracks. [. . . ] Possible cause Is the disc loaded upside down?Is the unit located near excessive vibrations?Has condensation formed inside the unit? Remote control Symptom The remote control does not operate. Possible cause Is the AC power lead of the unit plugged in? [. . . ]