User manual SHARP XL-MP40H

[. . . ] MIKRO KOMPONENTEN SYSTEM MICRO-CHANE SISTEMA MICRO MIKRO KOMPONENT SYSTEM MICRO SISTEMI MICRO SYSTEEM SISTEMA DE MICRO COMPONENTE MICRO COMPONENT SYSTEM MODELL MODLE MODELO MODELL MODELLO MODEL MODELO MODEL Mikro Komponenten System XL-MP40H besteht aus XL-MP40H (Hauptgert) und CP-MP40H (Lautsprechersystem). Micro-chane XL-MP40H compose de XL-MP40H (appareil principal) et CP-MP40H (enceinte acoustique). Sistema micro XL-MP40H que consta de XL-MP40H (aparato principal) y CP-MP40H (sistema de altavoces). XL-MP40H mikro komponent system bestende av XL-MP40H (huvudenhet) och CP-MP40H (hgtalarsystem). [. . . ] Within 5 seconds, press the SHIFT button and then the MEMORY button. Press the PRESET ( or ) button once to advance the time by 1 minute. To confirm the time display: Press the SHIFT button and then the CLOCK button. The time display will appear for about 5 seconds. Note: The "0:00" or time will flash when the AC power supply is restored after a power failure or unplugging the unit. To readjust the clock: Perform "Setting the clock" from the beginning. If the "0:00" is not flashing in step 1, step 2 (for selecting the 24-hour or 12-hour display) will be skipped. To change the 24-hour or 12-hour display: 1 Clear all the programmed contents. [Refer to "Clearing all the memory (reset)" on page 24 for details. ] 2 Perform "Setting the clock" from the beginning. 2 Within 1 minute, press the PRESET ( or ) button to select 24-hour or 12-hour display, then press the SHIFT button and then the MEMORY button. "0:00" "AM 12:00" The 24-hour display will appear. (0:00 - 23:59) The 12-hour display will appear. (AM 12:00 - PM 11:59) Basic Operation 8 E-8 05/1/14 XL-MP40H(H)E1. fm TINSZA040SJZZ XL-MP40H Listening to a disc This system can play back a standard CD, CD-R/RW in the CD format and CD-R/RW with MP3 or WMA files, but cannot record on them. Some audio CD-R and CD-RW discs may not be playable due to the state of the disc or the equipment used for recording. It is an acronym which stands for MPEG Audio Layer 3. MP3 is a type of audio code which is processed by significant compression from the original audio source with very little loss in sound quality. " The MP3 track indicator will light up when an MP3 track is read. " This system supports MPEG 1 Layer 3, MPEG 2 Layer 3, and VBR files. " During VBR file playback, time counter in the display may differ from its actual playback time. WMA: WMA files are ASF (Advanced Systems Format) audio files which are compressed with Windows Media Audio codec. WMA is developed by Microsoft as an audio format file for Windows Media Player. " The WMA track indicator will light up when a WMA track is read. " Supported bit rates for WMA files range from 64 kbps to 160 kbps. ENGLISH 13 Disc Playback SHARP TINSZA040SJZZ (H) E-9 05/1/14 XL-MP40H(H)E1. fm TINSZA040SJZZ XL-MP40H ENGLISH 1 2 3 14 Press the ON/STAND-BY button to turn the power on. Press the FUNCTION button until "CD DISC" appears on the display. When operating with the remote control, press the CD button. [. . . ] 2 If the unit is not restored in the previous operation, unplug and plug in the unit, and then turn the power on. Note: If neither operation above restores the unit, clear all the memory by resetting it. Sudden temperature changes, storage or operation in an extremely humid environment may cause condensation inside the cabinet (CD pickup, tape heads, etc. ) or on the transmitter on the remote control. Condensation can cause the unit to malfunction. If this happens, leave the power on with no disc (or cassette) in the unit until normal playback is possible (about 1 hour). [. . . ]