User manual SHARP XL-MP60

[. . . ] Thank you for purchasing this SHARP product. To obtain the best performance from this product, please read this manual carefully. It will guide you in operating your SHARP product. MICRO COMPONENT SYSTEM XL-MP60 Micro Component System consisting of XL-MP60 (main unit), CP-MP60F (front speakers) and CP-MP60SW (subwoofer). MODEL XL-MP60 OPERATION MANUAL XL-MP60 SPECIAL NOTES Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. [. . . ] Release the button to resume playback. Track up/ Track down Caution: " Do not place two discs in one disc tray. " Do not play discs with special shapes (heart or octagon shaped) as it may cause malfunctions. " Do not push the disc compartment while it is moving. " If the power fails while the disc compartment is open, wait until the power is restored. " If the disc compartment is stopped with force, the unit will not function. If this occurs, press the ON/STAND-BY button to enter the power stand-by mode and then turn the power on again. " If TV or radio interference occurs during disc operation, move the unit away from it. " If a disc is damaged, dirty, or loaded upside down, the disc will skip or not play. Fast forward/Fast reverse 18 Notes: " Track up/track down and fast forward/fast reverse are possible only within one disc. " When the end of the last track is reached during fast forward, " END" will appear on the display and disc operation will be paused. When the beginning of the first track is reached during fast reverse, the unit will enter the playback mode. ( : Last track number) " CD sound is heard during fast forward/fast reverse, except for CD-R/ RW in the MP3 or WMA format. (Check elapsed time on the display. ) Advanced disc playback !To change the display (CD-R/RW discs recorded in the MP3 or WMA format only) While in the stop mode or playback mode, press the DISPLAY button. Each time the button is pressed, the display will change as follows. [When in the stop mode] XL-MP60 Total number of tracks Folder name !To select the desired folder or track by name (CD-R/RW discs recorded in the MP3 or WMA format only) Track name [When in the playback mode] 1 While in the stop mode, press the DISPLAY button on the remote control to display the folder name. Select the desired folder by pressing the Press the DISPLAY button to display the track name. or button. 2 3 4 5 Elapsed Track number playback time Folder name Track name Album name Select the desired track by pressing the Press the playback. / button to begin or button. Artist name Title name 19 Disc Playback XL-MP60 Advanced disc playback (continued) !To play from a specified disc You can start playback from the desired disc by selecting the number. !Direct track search By using the direct search buttons, the desired tracks on the current disc can be played. Use the direct search buttons on the remote control to select the desired track while playing the selected disc. [. . . ] (2. 2 kg)/each Output power Output terminals Front speakers: 37. 5 watts minimum RMS per channel into 6 ohms from 100 Hz to 20 kHz, 10% total harmonic distortion Subwoofer: 45 watts minimum RMS into 6 ohms from 70 Hz to 130 Hz, 10% total harmonic distortion Front speakers and subwoofer: 6 ohms Headphones: 16 - 50 ohms (recommended: 32 ohms) Video/Auxiliary (audio signal): 500 mV/47 k ohms Dimensions Weight !Subwoofer Type Maximum input power Rated input power Impedance Dimensions 5-1/8" (13 cm) subwoofer system (magnetic shield) 90 W 45 W 6 ohms Width: 6-5/16" (160 mm) Height: 9-7/16" (240 mm) Depth: 11-1/4" (285mm) 7. 3 lbs. CD player Type Signal readout 5-disc multi-play compact disc player Non-contact, 3-beam semiconductor laser pickup Weight D/A converter 1-bit D/A converter Frequency response 20 - 20, 000 Hz Dynamic range 90 dB (1 kHz) 31 References !Amplifier Maximum input power Rated input power Impedance CONSUMER LIMITED WARRANTY SHARP ELECTRONICS CORPORATION warrants to the first consumer purchaser that this Sharp brand product (the "Product"), when shipped in its original container, will be free from defective workmanship and materials, and agrees that it will, at its option, either repair the defect or replace the defective Product or part thereof with a new or remanufactured equivalent at no charge to the purchaser for parts or labor for the period(s) set forth below. [. . . ]