User manual SHARP XL-UH222H

[. . . ] MIKRO KOMPONENTEN SYSTEM MICRO-CHANE SISTEMA MICRO MIKRO KOMPONENT SYSTEM MICRO SISTEMI MICRO SYSTEEM SISTEMA DE MICRO COMPONENTE MICRO COMPONENT SYSTEM MODELL MODLE MODELO MODELL MODELLO MODEL MODELO MODEL Die Abbildungen in dieser Bedienungsanleitung sind fr das Modell XL-UH220H. Les illustrations utilises dans ce mode d'emploi sont pour le modle XL-UH220H. Las ilustraciones impresas en este manual de manejo son del modelo XL-UH220H. Bilderna i denna bruksanvisning gller fr modelltypen XL-UH220H. [. . . ] Now, you can enjoy music. E-11 General control Volume control Main unit operation: When the VOLUME control is turned clockwise, the volume will increase. When it is turned anti-clockwise, the volume will decrease. Remote control operation: Press the VOLUME (+ or -) button to increase or decrease the volume. 0 . . . . . 30 MAXIMUM XL-UH220H XL-UH220H (BK) XL-UH222H ENGLISH Bass control When the power is first turned on, the unit will enter the extra bass mode which emphasises the bass frequencies, and "X-BASS" will appear. To cancel the extra bass mode, press the X-BASS/DEMO button on the remote control. To turn the power on Press the ON/STAND-BY button to turn the power on. After use: Press the ON/STAND-BY button to enter the power stand-by mode. Equaliser When the EQUALIZER MODE button on the remote control is pressed, the current mode setting will be displayed. To change to a different mode, press the EQUALIZER MODE button repeatedly until the desired sound mode appears. Illumination light control When the power is turned on, ring around the volume control light up. To turn on/off the light, hold down the CLEAR/DIMMER button on the remote control for more than 2 seconds. FLAT ROCK CLASSIC POPS VOCAL JAZZ No equalisation. For jazz. Speaker light up control (XL-UH222H only) The speaker will light up according to the level of the music source played back. To turn on/off the light, hold down the CLEAR/DIMMER button on the remote control for 2 seconds or more. Volume auto fade-in If you turn off and on the main unit with the volume set to 27 or higher, the volume starts at 16 and fades in to the last set level. Basic Operation 8 E-12 XL-UH220H XL-UH220H (BK) XL-UH222H Setting the clock (Remote Control only) 5 Press the or button to adjust the hour and then press the MEMORY button. ENGLISH Press the or button once to advance the time by 1 hour. Hold it down to advance continuously. 6 Press the or button to adjust the minutes and then press the MEMORY button. Basic Operation In this example, the clock is set for the 24-hour (0:00) display. Press the or button once to advance the time by 1 minute. Hold it down to change the time in 5-minute intervals. To confirm the time display: [When the unit is in the stand-by mode] Press the CLOCK/TIMER button. The time display will appear for about 10 seconds. [When the power is on] Press the CLOCK/TIMER button. Within 10 seconds, press the or button to display the time. The time display will appear for about 10 seconds. Note: The "CLOCK" will appear or time will flash to confirm the time display when the AC power supply is restored after a power failure or unplugging the unit. If incorrect, readjust the clock as follows. To readjust the clock: Perform "Setting the clock" from step 1. If the "CLOCK" does not appear in step 3, step 4 (for selecting the 24-hour or 12-hour display) will be skipped. To change the 24-hour or 12-hour display: 1 Clear all the programmed contents. [. . . ] Note: If neither operation above restores the unit, clear all the memory by resetting it. Clearing all the memory (reset) Symptom The radio makes unusual noises continuously. Possible cause Is the unit placed near the TV or computer?Is the FM aerial or AM loop aerial placed properly?Move the aerial away from the AC power lead if it's located nearby. [. . . ]