User manual SHARP XL-UH3H

[. . . ] Note: This product is not compatible with MTP and AAC file systems. This equipment complies with the requirements of Directives 89/336/EEC and 73/23/EEC as amended by 93/68/EEC. When the ON/STAND-BY button is set at STAND-BY position, mains voltage is still present inside the unit. When the ON/STAND-BY button is set at STAND-BY position, the unit may be brought into operation by the timer mode or remote control. [. . . ] Repeat steps 2 ­ 5 for other folder/tracks. The programme will automatically cancelled if you press the ON/ STAND-BY button to enter the stand-by mode or change the function from USB/SD to another. Repeat play can play single track and all track sequence continuously. Notes: If you press the or button during random play, you can move to the track selected next by the random operation. In random play, the unit will select and play tracks automatically. (You cannot select the order of the tracks. ) During random play, repeat function is not possible. In random function, playback will stop after all the tracks are played randomly. Caution: After performing repeat, be sure to press the Otherwise, it will play continuously. Each time press the button, the repeat mode changes in the following order: In case of an USB/SD mode: Note: ( ) When in folder mode, the selected playmode can be used for the files in the selected folder only. Playback order for MP3 files may differ sometimes depending on the writing software used during file download. Files cannot be played back if there is no MP3/WMA extension. Playlists are not supported on this unit. This unit only supports MP3 ID3-Tag version 1. The display playback time may not be displayed correctly when playing back a variable bitrate file. wMA meta tag also supports title , artist and album name which are recorded in WMA files. Copyright protected WMA files cannot be played back. The tracks can be played in random order automatically. To random play all tracks: Press the RANDOM button on the remote control so that the random indicator light up in the display window. When an RDS (Radio Data System) station is tuned in, the frequency will be displayed first, and then the RDS indicator will light up. The reception changes to monaural, and the sound becomes clearer. Press the ON/STAND-BY button to turn the power on. [. . . ] If a CD is dirty or does not play properly, clean it with a soft, dry cloth, wiping straight out from the centre, along the radius. When this product is subjected to strong external interference (mechanical shock, excessive static electricity, abnormal supply voltage due to lightning, etc. ) or if it is operated incorrectly , it may malfunction. If such a problem occurs, do the following: 1 Set the unit to the stand-by mode and turn the power on again. [. . . ]