User manual SHARP XLHP404 OPERATION MANUAL

[. . . ] XL-HP404E(E) TINSEA004AWZZ 1 Thank you for purchasing this SHARP product. To obtain the best performance from this product, please read this manual carefully. It will guide you in operating your SHARP product. MICRO COMPONENT SYSTEM MODEL XL-HP404E Micro Component System consisting of XL-HP404E (main unit) and CP-HP404E (speaker system). XL-HP404E OPERATION MANUAL If you require any advice or assistance regarding your Sharp product, please visit our web-site www. sharp. co. uk/customersupport. Customers without Internet access may telephone 08705 274277 during office hours (or (01) 676 0648 if telephoning from Ireland). 0301 Accessories Please confirm that the following accessories are included. Remote control 1 AM loop aerial 1 FM aerial 1 Note: Only the above accessories are included. 03/9/27 XL-HP404E(E)_FRONT. fm TINSEA004AWZZ XL-HP404E Special notes NOTES FOR USERS IN THE U. K. [. . . ] If you make a mistake, the programmed tracks can be cleared by pressing the CLEAR/DIMMER button. Press the / button to start playback. 6 7 18 03/10/9 XL-HP404E(E)2. fm TINSEA004AWZZ Listening to the radio " Tuning XL-HP404E 1 2 3 Press the ON/STAND-BY button to turn the power on. Press the TUNER (BAND) button repeatedly to select the desired frequency band (FM or AM). or ) button to tune in to the desired 5 Notes: !When radio interference occurs, auto scan tuning may stop automatically at that point. Auto scan tuning will skip weak signal stations. To stop the auto tuning, press the TUNING button again. " To receive an FM stereo transmission Auto power on function: When you press any of the following buttons, the unit turns on. TUNER (BAND) button (main unit and remote control): The unit turns on and the "TUNER" function is activated. / button on the main unit: The unit turns on and playback of !the last function starts (CD/TAPE/TUNER/VIDEO). Press the TUNER (BAND) button to display the "ST" indicator. " " will appear when an FM broadcast is in stereo. If the FM reception is weak, press the TUNER (BAND) button to extinguish the "ST" indicator. The reception changes to monaural, and the sound becomes clearer. FM stereo mode indicator FM stereo receiving indicator 19 03/10/9 XL-HP404E(E)2. fm TINSEA004AWZZ Radio Manual tuning: Press the TUNING button as many times as required to tune in to the desired station. Auto tuning: When the TUNING button is pressed for more than 0. 5 seconds, scanning will start automatically and the tuner will stop at the first receivable broadcast station. XL-HP404E Listening to the radio (continued) !Memorising a station You can store 40 AM and FM stations in memory and recall them at the push of a button. To recall a memorised station Press the PRESET ( or lect the desired station. ) button for less than 0. 5 seconds to se- 1 2 Perform steps 1 - 3 in "Tuning" on page 19. Press the MEMORY/SET (MEMORY) button to enter the preset tuning saving mode. !To scan the preset stations The stations saved in memory can be scanned automatically. (Preset memory scan) 1 2 Press the PRESET ( or ) button for more than 0. 5 seconds. [. . . ] Cleaning the cabinet Periodically wipe the cabinet with a soft cloth and a diluted soap solution, then with a dry cloth. Caution: " Do not use chemicals for cleaning (petrol, paint thinner, etc. ). " Do not apply oil to the inside of the unit. It may cause malfunctions. 32 03/10/9 XL-HP404E(E)3. fm TINSEA004AWZZ Specifications As part of our policy of continuous improvement, SHARP reserves the right to make design and specification changes for product improvement without prior notice. [. . . ]