User manual SHARP XLHP550 OPERATION MANUAL

[. . . ] MICRO COMPONENT SYSTEM MODEL Thank you for purchasing this SHARP product. To obtain the best performance from this product, please read this manual carefully. It will guide you in operating your SHARP product. XL-HP550E Micro Component System consisting of XL-HP550E (main unit), CP-HP550E (front speakers) and GBOXS0111AWM1 (surround speakers). XL-HP550E OPERATION MANUAL If you require any advice or assistance regarding your Sharp product, please visit our web-site www. sharp. co. uk/support. Customers without Internet access may telephone 08705 274277 during office hours (or (01) 676 0648 if telephoning from Ireland). 0101 XLHP550E(FRONT) 1 2002. 08. 07, 12:41 XL-HP550E Special notes NOTES FOR USERS IN THE U. K. [. . . ] To cancel repeat play: Press the / button again. For example, to choose 13 1 Press the "+10" button once. For example, to choose 30 1 Press the "+10" button three times. If the direct search buttons are pressed whilst the disc is stopped, press the / button to start the desired track on the current disc. A track number higher than the number of tracks on the disc cannot be selected. During random play, direct search is not possible. " Random play The tracks on the disc(s) can be played in random order automatically. To random play all tracks on up to 3 discs: 1 Press the / button. 2 Press the RANDOM button on the remote control. To random play all tracks on the chosen disc: 1 Press one of the DISC SELECT - ( 1 - 3) buttons. 2 Press the RANDOM button on the remote control. To cancel random play: Press the / button. Notes: !If you press the button during random play, you can move to the track selected next by the random operation. On the other hand, the button does not allow you to move to the previous track. The beginning of the track being played will be located. In random play, the CD player will select and play tracks automatically. (You cannot select the order of the tracks. ) Caution: After performing repeat or random play, be sure to press the (CD ) button. Otherwise, the disc(s) will play continuously. 19 02/8/7 XL-HP550E(E)2. fm CD Playback XL-HP550E Advanced CD playback (continued) " Programmed play You can choose up to 32 selections for playback in the order you like. To clear the programmed selections: Press the CLEAR button on the remote control whilst the "MEMORY" indicator is flashing. Each time the button is pressed, one track will be cleared, beginning with the last track programmed. To cancel the programmed play mode: Whilst in the stop mode and the "MEMORY" indicator is lit, press the CLEAR button on the remote control. The "MEMORY" indicator will disappear and all the programmed contents will be cleared. Adding tracks to the programme: If a programme has been previously stored, the "MEMORY" indicator will be displayed. [. . . ] Caution: " Do not use chemicals for cleaning (petrol, paint thinner, etc. ). " Do not apply oil to the inside of the unit. It may cause malfunctions. 31 02/8/7 XL-HP550E(E)3. fm References Caution: This operation will erase all data stored in memory including clock, timer settings, tuner preset, and CD programme. XL-HP550E Specifications As part of our policy of continuous improvement, SHARP reserves the right to make design and specification changes for product improvement without prior notice. The performance specification figures indicated are nominal values of production units. [. . . ]