User manual SHARP XLMP35H OPERATION MANUAL

[. . . ] XL-MP35H(E) TINSE0144SJZZ 1 Thank you for purchasing this SHARP product. To obtain the best performance from this product, please read this manual carefully. It will guide you in operating your SHARP product. MICRO COMPONENT SYSTEM MODEL XL-MP35H Micro Component System consisting of XL-MP35H (main unit) and CP-XL45H (speaker system). XL-MP35H OPERATION MANUAL If you require any advice or assistance regarding your Sharp product, please visit our web-site www. sharp. co. uk/customersupport. Customers without Internet access may telephone 08705 274277 during office hours (or (01) 676 0648 if telephoning from Ireland). 0301 Accessories Please confirm that the following accessories are included. Remote control 1 FM/AM loop aerial 1 AC power lead 1 Note: Only the above accessories are included. 03/8/20 XL-MP35H(E)_FRONT. fm TINSE0144SJZZ XL-MP35H Special notes NOTES FOR USERS IN THE U. K. [. . . ] [It is not necessary to press the ( ) button. ] !A track number higher than the number of tracks on the disc cannot be selected. During random play, direct search is not possible. For MP3 discs, you can select the track number but cannot select the folder by pressing the direct search button(s). To cancel random play: Press the RANDOM button again. The random play will stop automatically when all tracks are played once. (The same track will not be played back twice. ) !In random play, the unit will select and play tracks automatically. (You cannot select the order of the tracks. ) !If you press the button during random play, you can move to the track selected next by the random operation. On the other hand, the button does not allow you to move to the previous track. The beginning of the track being played will be located. 03/8/20 XL-MP35H(E)2. fm TINSE0144SJZZ XL-MP35H Advanced CD or MP3 disc playback (continued) !Programmed play You can choose up to 32 selections for playback in the order you like. To clear the programmed selections: Whilst the "MEMORY" indicator is lit, set the CD to the stop mode and then press the CLEAR button. Each time the button is pressed, one track will be cleared, beginning with the last track programmed. When all the tracks are cleared, "MEMORY" will disappear. Adding tracks to the programme: If a programme has been previously stored, the "MEMORY" indicator will be displayed. The new tracks will be stored after the last track of the original programme. CD or MP3 disc Playback 1 Whilst in the stop mode, use the direct search buttons to select the desired track. Selected track number You can also select a track by pressing the or button. Notes: " Opening the disc compartment automatically cancels the programmed sequence. " Even if you press the ON/STAND-BY button to enter the stand-by mode or the function is changed from CD to some other function, the programmed selections will not be cleared. " During the programme operation, random play is not possible. " For MP3 discs, you can select the track number but cannot select the folder by pressing the direct search button(s). !Care of compact discs Compact discs are fairly resistant to damage, however mistracking can occur due to an accumulation of dirt on the disc surface. [. . . ] If this happens, leave the power on with no disc (or cassette) in the unit until normal playback is possible (about 1 hour). Wipe off any condensation on the transmitter with a soft cloth before operating the unit. Erase head Recording/Playback head Capstan Pinch roller " After long use, the deck's heads and capstans may become magnetised, causing poor sound. Demagnetise these parts once every 30 hours of playing/recording time by using a commercial tape head demagnetiser. [. . . ]