User manual SHARP XV-Z15000

[. . . ] XV-Z15000 PROJECTOR PROJECTEUR PROYECTOR PROJETOR OPERATION MANUAL MODE D'EMPLOI MANUAL DE MANEJO MANUAL DE OPERAO ENGLISH FRANAIS ESPAOL PORTUGUS SPECIAL NOTE FOR USERS IN THE U. K. The mains lead of this product is fitted with a non-rewireable (moulded) plug incorporating a 10A fuse. Should the fuse need to be replaced, a BSI or ASTA approved BS 1362 fuse marked or and of the same rating as above, which is also indicated on the pin face of the plug, must be used. Always refit the fuse cover after replacing the fuse. [. . . ] (Go to step 3. ) C. M. S. 1 Select Color Hue Saturation Value Effect C. M. S. 1 Reset Return 0 0 0 0 On 3 Set or adjust each item in the C. M. S. color adjustment screen. C. M. S. 1 Select Color Hue Saturation Value Effect C. M. S. 1 Reset Return 0 0 0 0 On SEL. /ADJ. color adjustment screen: Selectable items Description Starts over the selection of the color to be corrected. Sets the value of the main colors. *1 2 Use the picker and select the color of the projected image to correct. The picker can be operated by adjustment buttons (P/R/O/Q) on the remote control. By enlarging the projected image using or MAGNIFY, more fine adjustment can be performed. Select Color Hue Saturation Value Effect C. M. S. 1*2 (or C. M. S. 2) Reset Specifies the range of color correction. Checks the appearance of the projected image after above correction. Sets "Hue", "Saturation", "Value", and "Effect" to their default values. Completes the correction and closes the C. M. S. color adjustment screen. Picker Return *1 To specify the range of color correction, select "Effect" and press O or Q button. O button Q button Specifies smaller range. Specifies larger range. By continuing to press the adjustment buttons (P/R/O/Q), the picker moves rapidly. After selecting the color of the projected image to correct, press ENTER. (Go to step 3. ) *2 To check the appearance of the projected image, select "C. M. S. 1" (or "C. M. S. 2") and set to "On" or "Off". On The appearance of the projected image after above color adjustment reflected can be checked. The appearance of the projected image in former color adjustment can be checked. Off 4 To complete the C. M. S. color adjustment, select "Return" and press ENTER. Note The C. M. S. color adjustment can be made to one color each in "C. M. S. 1" and "C. M. S. 2". -38 Menu operation Page 34 8 Adjusting the Bright Boost Bright Boost uses Texas Instruments' Bright Boost technology. The image becomes brighter while the color reproduction is kept at a high level. Selectable items On Off Description The Bright Boost function is activated. The Bright Boost function is not activated. w Mosquito Noise Reduction (MNR) The so-called Mosquito Noise (flickering) can be reduced. Selectable items Off Level 1 Level 2 Level 3 Description MNR does not function. Sets the MNR level for viewing a clearer picture. 9 Selecting the Film Mode This function provides high-quality playback of images originally projected at 24 fps, such as movies on DVDs. Selectable items Auto Off Description Films are detected automatically. Films are not detected. Note Set "MNR" to "Off" in the following cases: When the image is blurry. When the contours and colors of moving images drag. When TV broadcasts with weak signals are projected. [. . . ] 36 SIG-ADJ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40 Signal Info. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41 Signal Type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40 SMART ZOOM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]