User manual SHARP XV-Z90U

[. . . ] XV-Z90U PROJECTOR PROJECTEUR PROYECTOR PROJETOR OPERATION MANUAL MODE D'EMPLOI MANUAL DE OPERACION MANUAL DE OPERAO ENGLISH FRANAIS ESPAOL PORTUGUS Before using the projector, please read this operation manual carefully. ENGLISH Information Important OPERATION MANUAL IMPORTANT For your assistance in reporting the loss or theft of your Projector, please record the Serial Number located on the bottom of the projector and retain this information. Before recycling the packaging, please be sure that you have checked the contents of the carton thoroughly against the list of "Supplied Accessories" on page 11. ENGLISH Model No. : XV-Z90U Serial No. : There are two important reasons for prompt warranty registration of your new SHARP Projector, using the REGISTRATION CARD packed with the projector. WARRANTY This is to assure that you immediately receive the full benefit of the parts, service and labor warranty applicable to your purchase. CONSUMER PRODUCT SAFETY ACT To ensure that you will promptly receive any safety notification of inspection, modification, or recall that SHARP may be required to give under the 1972 Consumer Product Safety Act, PLEASE READ CAREFULLY THE IMPORTANT "LIMITED WARRANTY" CLAUSE. [. . . ] For details on "White Emphasis", see "Description of White Emphasis" on page 30. For details on "Picture Setting", see "Picture Setting Function" on page 32. 1 Press MENU. The "Picture" menu screen appears. 2 Press 2 / to select a specific adjustment item. 3 Press / to move the mark of the selected adjustment item to the desired setting. 4 To exit the menu screen, press MENU. To reset all adjustment items, select "Reset" on the "Picture" menu screen and press ENTER. "Tint" cannot be used with PAL, SECAM, PAL-M, PAL-N or PAL-60. "Contrast", "Bright", "Color", "Tint" and "Sharp" cannot be used in the DIGITAL INPUT mode. E-29 Adjusting the Picture Adjusting the Color Temperature This function allows for selecting the desired color temperature from six settings. With the lower value selected, the projected image becomes warmer, reddish and incandescent-like while with the higher value, the image becomes cooler, bluish and fluorescent-like. Description of Color Temperature 4 2, 3 1, 5 1 Press MENU. The "Picture" menu screen appears. / to select "CLR Temp", and then press 3 Press / to select the desired color temperature setting. On-screen Display 4 Press ENTER to save the setting. 5 To exit the menu screen, press MENU. Values on "CLR Temp" are only for general standard purposes. The less the value is set to, the warmer, reddish, incandescent-like the image becomes. The more the value is set to, the cooler, bluish, fluorescent-like the image becomes. "CLR-Temp" cannot be used in the DIGITAL INPUT mode. Basic Operation Emphasizing the Contrast This function emphasizes the bright portions of images to obtain a higher contrast image. Description of White Emphasis Selected item Description For emphasizing the bright portions of images For disabling "White Emphasis" ON ( 2, 3 1, 4 OFF ( ) ) 1 Press MENU. The "Picture" menu screen appears. 2 Press / to select "White Emphasis". to select the desired white emphasis 3 Press / setting. On-screen Display 4 To exit the menu screen, press MENU. E-30 Adjusting the Picture Gamma Correction Function Gamma is an image quality enhancement function. Four gamma settings are available to allow for differences in the brightness of the room. Description of Gamma Modes Selected Mode Standard Description Standard picture without gamma correction Gives greater depth to darker portions of images for a more exciting theater experience. Emphasizes the gradation of the intermediate to high brightness portions of the image for more detailed expression. Brighten the darker portions of images for easier viewing in a dimly lit room. 4 2, 3 1, 5 Black Detail White Detail Brighten On-screen Display 1 Press MENU. [. . . ] From a Sharp Authorized Servicer located in the United States. To find the location of the nearest Sharp Authorized Servicer, call Sharp toll free at 1800-BE-SHARP. Contact your Sharp Authorized Servicer to obtain in-home service for this Product. The Servicer will come to your home and if necessary to remove the Product for repair at the Servicer's facility, the Servicer will reinstall it upon completion of repair. [. . . ]