User manual SHARPER IMAGE SN001

[. . . ] Before use, please read the safety information and precautions contained in the following pages to ensure safe use of your new Digital Still Camera. The AA-V37 AC Power Adapter should be used with: AC 120 V`, 60 Hz in the USA and Canada, AC 110 – 240 V`, 50/60 Hz in other countries. CAUTION (applies to the AA-V37) TO PREVENT ELECTRIC SHOCK MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT. ATTENTION (s’applique à l’AA-V37) POUR ÉVITER LES CHOCS ÉLECTRIQUES, INTRODUIRE LA LAME LA PLUS LARGE DE LA FICHE DANS LA BORNE CORRESPONDANTE DE LA PRISE ET POUSSER JUSQU’AU FOND. Using This Instruction Manual • All major sections and subsections are listed in the Table Of Contents (੬ pg. [. . . ] •Be careful when using hot light sources for long periods of time. Heat can easily damage film and picture quality. O 4 FF PRO STILL: Selects the photography mode. BALANCE: Sets the white balance in accordance with the film. CLEAR: Returns to the default settings. EN 51 8 7 10, 11 FILM COPY SETTING FRAME 2032x1536 FINE QUALITY ON Q. REVIEW NEGA FILM FILM 6M PRO S PRO STILL AUTO W. EXE CLEAR 7 Press the r t button to select “W. BALANCE” and press the w e button to select either “AUTO” or “MWB”. Making calibration settings •For negative film Set the provided blue film on top of an unexposed (all brown) part of the negative and load into the film holder. Press the r t button to select “W. BALANCE” and then hold down the EXE button until the shoot standby lamp (green) stops flashing and goes out. •For positive film Remove the provided blue film and attach the film copying adapter to the camera. Press the Shutter button all the way to shoot the video. •The flash standby lamp (red) lights during the video shooting. •Video shooting will stop automatically after about 20 seconds. •“NOW RECORDING” appears on the LCD screen. Press the Shutter button again to stop the video shooting before 20 seconds are up. •While the video file is stored in the Memory card, the flash standby lamp (red) flashes, and then goes off when the recording has finished. Do not operate the camera while the light flashes. NOTES: 3 ● Sound is also recorded. ● It is not possible to use the flash for video shooting. ● It will take awhile to store a video file on a Memory card. ● You can change the settings of “Manual Focus” (੬ pg. 34), “Iris Setting” (੬ pg. [. . . ] WHAT WE WILL DO: If this product is found to be defective, SHARPER IMAGE will repair or replace defective parts at no charge to the original owner. Such repair and replacement services shall be rendered by SHARPER IMAGE during normal business hours at SHARPER IMAGE authorized service centers. Parts used for replacement are warranted only for the remainder of the Warranty Period. All products and parts thereof may be brought to a SHARPER IMAGE authorized service center on a carry-in basis except for Television sets having a screen size 25 inches and above which are covered on an in-home basis. [. . . ]