User manual SHERWOOD RD-5503

[. . . ] OPERATING INSTRUCTIONS RD-5503 SURROUND RECEIVER Introduction READ THIS BEFORE OPERATING YOUR UNIT ENGLISH This symbol is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. This symbol is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. WARNING : TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. Caution regarding installation Note : For heat dispersal, do not install this unit in a confined space such as a bookcase or similar enclosure. Do not block ventilation openings or stack other equipment on the top. FOR YOUR SAFETY Units shipped to Australia are designed for operation on 230 V AC only. To ensure safe operation, the three-pin plug supplied must be inserted only into a standard three-pin power point which is effectively earthed through the normal household wiring. Extension cords used with the equipment must be three-core and be correctly wired to provide connection to earth. [. . . ] · If "MEM" goes off, start again from the above step 2. MEM DIRECT · "MEM" is flickering for several seconds. 4. Repeat the above steps1 to 3 to memorize other stations. MEMORY BACKUP FUNCTION The following items, set before the receiver is turned off, are memorized. · INPUT SELECTOR settings · Surround mode settings · Preset stations, etc. Tuning to preset stations · After selecting the tuner as an input source, select the desired preset number. · When using the NUMERIC buttons on the remote control. Examples) For "3" : For "15" : For "30" : 21 RDS Tuner (Regional Option for some countries in Europe, etc. ) LISTENING TO RDS BROADCASTS(FM ONLY) ENGLISH RDS(Radio Data System) is a method for sending information signals together with the transmitter signals. Your tuner is capable of translating these signals and putting the information on the display. These codes contain the following informations. Program Service name (PS), A list of Program Types (PTY), Traffic Announcement (TA), Clock Time (CT), Radio Text (RT). Note : In the other countries, RDS tuner function cannot be available. RDS search · Use this function to automatically search and receive the stations offering RDS services. 1. In the FM mode, select the RDS search mode. 2. When "RDS SRCH" is displayed, press the ENTER button. · Each time this button is pressed, the search mode changes as follows; RDS SRCH TP SRCH PTY SRCH OFF · The tuner automatically searches stations offering RDS services and the station name is displayed. · If no RDS station is found, "NO RDS" is displayed. · When "RDS SRCH" is not displayed, repeat again from the above step 1. TP search · Use this function to automatically search and receive the stations broadcasting the traffic program. 1. In the FM mode, press the SEARCH MODE button twice. 2. When "TP SRCH" is displayed, press the ENTER button. · "TP SRCH" is displayed. · The tuner automatically searches for stations broadcasting the traffic program. · "NO TRAFF" is displayed if the signal is too weak or there are no stations broadcasting the traffic program. · When "TP SRCH" is not displayed, repeat again from the above step 1. 22 PTY search · Use this function to automatically search and receive the stations broadcasting the desired program type. 1. In the FM mode, press the SEARCH MODE button ENGLISH three times. 2. When "PTY SRCH" is displayed, select the desired program type. · "PTY SRCH" is displayed. · Each time these buttons are pressed, one of 32 different types of programs is selected. (NEWS, AFFAIRS, INFO, SPORT, EDUCATE, DRAMA, CULTURE, SCIENCE, VARIED, POP M, ROCK M, EASY M, LIGHT M, CLASSICS, OTHER M, WEATHER, FINANCE, CHILDREN, SOCIAL, RELIGION, PHONE IN, TRAVEL, LEISURE, JAZZ, COUNTRY, NATION M, OLDIES, FOLK M, DOCUMENT, TEST, ALARM, NONE) · When "PTY SRCH" is not displayed, repeat again from the above step 1. 3. When the desired program is displayed, press the ENTER button. · The tuner automatically searches a station offering PTY services. [. . . ] · The antenna is in wrong position. · An incorrect station frequency has been memorized. · The memorized stations are cleared. · The antenna is not positioned for the best reception. [. . . ]