User manual SHIMANO SC-7900

[. . . ] SI-7DC0A-002 SERVICE INSTRUCTIONS MONTAGE-INSTRUCTIES EINBAUANLEITUNG INSTRUCTIONS DE MONTAGE INSTRUCCIONES DE SERVICIO ISTRUZIONI per l'ASSISTENZA Cycle Computer SC-7900 One Holland, Irvine, California 92618, U. S. A. Phone: +1-949-951-5003 Industrieweg 24, 8071 CT Nunspeet, The Netherlands Phone: +31-341-272222 3-77 Oimatsu-cho, Sakai-ku, Sakai-shi, Osaka 590-8577, Japan * Service Instructions in further languages are available at : http://techdocs. shimano. com Please note: specifications are subject to change for improvement without notice. XBC IZM Printed in Japan English Dutch German French Spanish Italian Japanese 3 ­ 52 53 ­ 100 101 ­ 148 149 ­ 196 197 ­ 244 245 ­ 292 293 ­ 340 INDEX 1. Features of the SC-7900 · Bracket combinations Cycle Computer SC-7900 6 7 7 8 8 9 12 19 19 19 20 22 22 23 English ························ ·············· 2. [. . . ] (6) Repeat steps (4) and (5) to enter all of the desired values. (7) If you press the select button or button A, the display will change to the next item. If you press button B, the screen will return to the previous setting item. Setting data recording This sets whether traveling data is to be recorded or not. If it is to be recorded, set the interval (sampling period) for data to be extracted. · Initial setting: OFF (1) Press the set button to enable the data recording setting to be changed. The ON/OFF setting for "mode" will be highlighted. (2) Press the select button, button A or button B to select the data recording setting. · mode: ON, OFF (3) Press the set button to confirm the selected setting. The sampling period value will be highlighted at this time. Next set the sampling period. 30 31 (4) Press the select button, button A or button B to select the desired sampling period. · Sampling period: 5 secs. , 15 secs. , 60 secs. * The shorter the sampling period, the more detailed is the data that can be recorded, however the length of recording time available will also become shorter. (5) Press the set button to confirm the selected setting. (6) If you press the select button or button A, the display will change to the next item. If you press button B, the screen will return to the previous setting item. Selecting the stopwatch mode Starting and stopping the stopwatch counter can be done using the set button on the main unit, or automatically by receiving a speed signal. (1) Press the set button to enable the stopwatch mode setting (AUTO/MANUAL) to be changed. The AUTO/MANU setting for "mode" will be highlighted. (2) Press the select button, button A or button B to select the desired mode. · AUTO (Automatic setting) When the main unit receives a speed signal, the stopwatch counter starts, and it stops approximately 4 seconds after the speed signal stops being received. · MANU (Manual setting) The stopwatch counter starts and stops manually when the set button on the main unit is pressed. (3) Press the set button to confirm the selected setting. [. . . ] You can update the main unit's software by connecting the USB dongle to the personal computer so that the personal computer can communicate with the main unit. For details, refer to the Shimano website. CAUTION: · When the software is updated, all data files remaining inside the main unit will be deleted. * After updating, you can start off in PC-LINK mode to write the settings which are stored on the PC into the main unit. · When updating the software, be sure to use a battery with sufficient charge remaining. [. . . ]