User manual SHOWTEC STAGE MASTER PRO

[. . . ] User Instruction Web site: www. highlite. nl E-mail: info@highlite. nl Contents Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Safety Rules . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Notice Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] The selected fixture number and name will appear in the window. Next, press the F9(Copy) button, a dialog box will appear reminding you whether you are sure or not. Press "Ok" to confirm this setting or the F1 button to exit. Press the F1(Esc) button to go back to the previous menu. 21 Setup Menu Tabset F1 XXXXXX Ch: 5 Channel :1 Table Total Item: 42 F5 1-6 7 - 12 13 - 18 19 - 24 24 - 30 31 - 36 37 - 42 43 - 48 000 000 000 000 000 000 000 000 000 000 000 000 000 000 000 000 000 000 000 000 000 000 000 000 000 000 000 000 000 000 000 000 000 000 000 000 000 000 000 000 000 000 000 000 000 000 000 000 F2 F3 F4 F6 F7 F8 Esc Next Prev F9 F10 F11 F12 In Fixture Setup menu, press the F9(Tabset) button to access Tabset menu. This menu allows you to preprogram up to 48 tabulating value(0-255), so that you can direct access this values for desired channel effects by pressing the button corresponding to the assignment channel. First, use the fader 1 to select the table total item between 1 and 48(Off indicates this function is disabled). Next use the fader 2 to scroll to the value you want to assign to the flashing frame of the table. Press the F10(Next) or F11(Prev) button to move from frame to frame. Be careful that the next value in the frame should be bigger than its previous value. Press the F9(Esc) button to go back to the previous menu. Save In Fixture setup menu, when you have completed the fixture configuration, be sure to press the F2(Save) button to confirm all the settings before you leaves this menu. If you fail to do so, all the settings you have made will lose. 22 Setup Menu Fixture Patch F1 F2 F3 F4 F9 F10 F11 F12 01 09 17 25 33 41 49 57 02 10 18 26 34 42 50 58 03 11 19 27 35 43 51 59 04 12 20 28 36 44 52 60 05 13 21 29 37 45 53 61 06 14 22 30 38 46 54 62 07 15 23 31 39 47 55 63 08 16 24 32 40 48 56 64 F5 F6 F7 DMX s/ l 1/ 14 Fix. Dw Esc Next Prev Fix: XXXXXX F8 In Setup menu, press the F4(FixPatch) button to access Fixture Patch menu, a new window will appear indicating all the 64 fixtures subjected to this console. In this menu, you will have to assign one of the fixture type previously configured to patch each of 64 fixtures. Press the F3(Next) or F4(Prev) button to scroll to the fixture number (from 01-64), then press the F11(Fix. Dw) button to select the type of fixture available in the library. It will be also indicated the starting channel(DMX s) of the fixture, the number of channels(DMX l) used by the fixture and the sum channels(Tot ch) occupied by all available fixtures. For example: Use F3 or F4 to scroll to number 01, next press F11 or F12 to select XXXXXX. As a result, XXXXXX will be assigned to the first fixture on the console. Proceed in this way to assign all 64 fixtures. Press the F1(Esc) button to leave this menu. Be careful that the sum of channel must not exceed 512, or an error message will appear and require you to re-enter this menu or carry out fixture configuration procedures when you leaves this menu. 23 Setup Menu Download Menu F1 Download Menu F5 F6 PC F2 F3 F4 Esc Card F7 F8 F9 F10 F11 F12 In Setup menu, press the F2(Download) button to access Download menu. In this menu, pressing the F4(Card) button allows to access Memory Card Menu, and pressing the F8(PC) button results in Download With PC Menu. [. . . ] In this case, these 5 steps from step 1 to step 5 will be added after the step 9 of this show. Press the F1(Esc) button to go back to the previous menu. 51 Edit Show Menu Clear a Show F1 Show Edit Utility F5 F6 InsShow CpyShow F2 F3 F4 Esc Show: 2 Clr Show Memory Used 5% [ ----------- ] Erase Copy F7 F8 Clone ShowAll F9 F10 F11 F12 In Show Edit Utility Menu, press F4(Clr Show) to clear the current show. You will be required to confirm by "Ok" or to exit by the F1 button. "Ok" confirms this operation, as a result, this show will be cleared and no step will be available in this show. Clone In Show Edit Utility Menu, press F5(Clone) to clone the current step(scene), the step will not any longer subject to the scene. [. . . ]