User manual SHURE SE535 REV 1

[. . . ] The cable connection is not designed for everyday use, and to prevent accidental separation, the connector has a snug fit. Take special care to prevent damage to the earphone and connector. â· Do not use pliers or other tools. [. . . ] Twist and pull to remove the sleeve from the nozzle. Slide on a new sleeve so that it completely covers the barb and the nozzle. Caution: If the barb or any of the nozzle is exposed, the sleeve is not properly installed. Replace sleeves if they do not tightly grip the nozzle. To ensure proper fit and performance, use only sleeves supplied by Shure (unless using custom molded sleeves). Select an earphone sleeve that provides the best fit and sound isolation. It should be easy to insert, fit comfortably, and easy to remove. Soft Flex Sleeves: In small, medium, and large sizes. Soft Foam Sleeves: Compress the foam sleeve between your fingers and insert into the ear canal. Hold in place for about ten seconds while the foam expands. If you notice a change in sound quality, remove the sleeve and check the nozzle of your earphone. If nozzle is blocked, clear obstruction by using wire loop end of cleaning tool. Caution: When cleaning, do not force any object through the earphone nozzle!This will damage the earphone sound filter. Warning: The cleaning tool is only to be used to clean the earphones. Any other use, such as using the tool to clean ears, could result in injury. [. . . ] If this happens, disconnect the cables and clean them using a dry cotton swab. WARNING: This product contains a chemical known to the State of California to cause cancer and birth defects or other reproductive harm. Meets applicable tests and performance criteria in European Standard EN55103 (1996) parts 1 and 2, for residential (E1) and light industrial (E2) environments. [. . . ]