User manual SIEMENS A56

[. . . ] Contents s 1 Safety precautions . . . . . . . . . . . . . . . . . . . . . 3 Safety Information . . . . . . . . . . . . . . . . . . . . . 4 Antenna care . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Phone operation . . . . . . . . . . . . . . . . . . . . . . [. . . ] This information may be useful for customer service. Alternatively enter in standby mode: *#06# 58 Setup Auto off The phone switches off each day at the set time. Confirm. Clock §Menu§KSetupKClock KSelect a function. Time/date The clock must be set correctly once at start-up. First enter the date (day/ month/year), then the time (24 hours, including seconds). J §OK§ Deactivate: §Manual§ §OK§ Press. Confirm. Note If the battery is removed for more than about 30 seconds, the clock must be reset. Setting of the date format to: DD: Day (2-digit) MM: Month (2-digit) YYYY: Year (4 digit) Auto timezone L If this feature is activated, you will be asked if you want to change the time whenever you cross into a new time zone (if this feature is supported by the network with which you are registering). Format date DD. MM. YYYY or MM. DD. YYYY Auto display The time display in standby mode can be switched on and off. Setup Connectivity §Menu§KSetupKConnectivity KSelect a function. Profile name: Enter/change name. 59 If necessary, check with your service provider for details: WAP profile settings Up to 5 WAP profiles can be set (may be barred by the service provider). The entries may vary depending on your service provider. To set a new profile: L G §Edit§ Select profile. Select profile range and make your settings/entries field by field. The entry card is displayed. G §Edit§ WAP Pa- IP address: * Enter IP rameters address. 36), if not set by the service provider. Linger time: Enter time in seconds after which a connection should be ended if no input or data exchange takes place. *) depends on the service provider, if necessary enter 2nd IP address and 2nd port. CSD settings (Circuit Switched Data) Dial-up no. : Enter ISP number. Password: Enter password (shown as a series of asterisks). The settings are stored and the profile list is shown. 38). §Save§ 60 Set HTTP profiles Setup L §Save§ The settings are stored and the profile list is shown. 38). Up to 5 profiles can be defined (may have been barred by the service provider). The settings have normally been carried out by the service provider in advance. To set a new profile: G G §Edit§ Select profile. Open menu. §Options§ Change settings Select and confirm. [. . . ] 58 manually . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 Switch on phone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 Symbols. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68 T T9 activate/deactivate . . . . . . . . . . . . . . . . . . . . . [. . . ]