User manual SIEMENS B15E42S0GB

[. . . ] *9000365773* 901202 9000365773 901202 Ú Installation instructions %2 *% $ PLQ % PLQ PLQ PLQ PLQ PD[ PLQ PLQ 9 / 1 PLQ Ú en I ns tallation instructions Important notes If the appliance is being installed under a hob, refer to the assembly instructions for the hob. Do not use the door handle to carry or install the appliance. Before installation, check the appliance for transportation damage. [. . . ] Identify the phase and neutral (zero) conductors in the power socket. The appliance could be damaged if incorrectly connected. Only connect the hob according to the connection diagram. The connection diagram is on the back of the appliance. To connect the appliance, place it in front of the kitchen unit. The service cable must be long enough. Preparing the kitchen units Safe use of this appliance can only be guaranteed if it has been installed professionally in accordance with these installation instructions. The installer is liable for damages incurred as a result of incorrect installation. Units into which ovens are to be fitted must be heat-resistant up to 90 °C and adjacent cabinets up to 70 °C. Carry out all cut-out work on the furniture unit and worktop before fitting the appliances. Otherwise, the correct operation of electrical components may be adversely affected. Parts that are accessible during installation may have sharp edges. Wear protective gloves to prevent injury from cuts. Secure freestanding units to the wall using standard, commercially available brackets A. Permanently fix furniture units to the worktop. 1 To ventilate the appliance, there must be a gap of 20 mm between the intermediate floor and the wall. The gap between the worktop and the appliance must not be closed using additional battens. [. . . ] Screw the appliance firmly in place. Removal 1. Disconnect the appliance from the power supply. Lift the appliance slightly and pull it out completely. [. . . ]