User manual SIEMENS C28

[. . . ] Gigaset C28 / English / A31008-A200-xxxx-x-xx19 /Ke ntucky 1 Gigaset C28 Expandable digital cordless phone Handset C28 Base 1 Charge status of the battery pack 2 Internal number of the handset 3 Display keys 4 Talk key 5 Directory key 6 End call and On/Off key 7 Ringer on/off (long press) 8 Keypad lock 9 Recall key - Confer (Flash) - Dial pause (long press) 10 Microphone 11 Speed dial list key 1 2 1 22-35 Þ Ü INT MENU V Register/Paging key (page 4/page 5) Display keys: Pressing the keys launches whichever function that appears above them in the display. Display icon Meaning when pressed Open the last number redial list (page 4). Open the calls or network mailbox list (page 4). Open the list of registered handsets (page 5). [. . . ] The display shows if you have not requested CLIP. Storing a number in the directory/speed dial list h/C¢ MENU ¢ NEW ENTRY ~OK ~OK Enter phone number and confirm. Speed dial: Enter the digit of the required speed dial key (2­9), then enter the name and confirm. Long press (back to idle status). a Muting You can mute your handset when making external calls. The call is 'held' (wait melody). To cancel the function: Press a briefly. Table for text/numerical entry: see page 6. Cursor control: see page 1. Speed dialling Example: the stored name is "3Anna" Press key I long ¢c to dial this number Dialling with the directory h ~ s c Open the directory. If there is more then one entry, select the name. Press the talk key. Gigaset C28 / English / A31008-A200-xxxx-x-xx19 /Ke ntucky 4 Last number redial list This list contains the five last dialled numbers. The following functions are available: Calling back a caller from the calls list: Û Select an entry c. ¢ ¢ ¢ Registering and de-registering handsets EDIT ENTRY SEND TO DIR Add/edit number and use to dial Store number in directory Clear the list: Þ ¢MENU¢L ¢OK. ¢ You can register up to four handsets on your base station. A Gigaset C28 handset that is not yet registered on a base is registered automatically. Other handsets must be registered manually. Dialling a number You can select a number from the last number redial list: Þ Select an entry c. Automatic registering: Gigaset handset C28 Any Gigaset C28 handset that is not registered to a base can be registered automatically. To register a handset for the first time, place it in the base with the display facing forward. Registering takes about 1 minute; a number of icons flash in the display. The handset is automatically assigned the next available internal number (1­4). This number appears in the top left of the display after successful registering, e. g. If all of the internal numbers 1 to 4 are used up (i. e. four handsets have been registered), handset number 4 is de-registered and overwritten. ¢ Calls list/Select services list Press the display key Û to open the caller list and select services list (see Menu Tree, page 8). Calls list: The number of the last 30 missed calls are stored. When the phone is in idle status, new missed calls are indicated by a flashing Û . Example of how the calls list appears: C LOG 05/10 Number of old, read entries Number of new entries Manual registering: Gigaset handset 1. On the handset: MENU REGISTER HS enter your system PIN (default is 0000) OK. [. . . ] The handsets will not ring in this case. Internal conference/Call connecting You are in conversation with an external caller. 116 g NiMH 400mAh 2xAAA Pack Resetting the handset Restoring the factory settings of the handset will not affect entries in the directory, the calls list or the speed dial list or the handset's registration to the base. MENU ¢ OI ¢ RESET ?¢ OK. Base station settings Changing pause after line seizure You can change the length of the pause that is inserted between pressing the talk key c and sending the number: MENU NO1L The digit for the current pause length flashes: 1 = 1 sec. ; 2 = 3 sec. ; 3 = 7 sec. ; 4 = 2. 5 sec. Enter digit OK. V30145-K1310-X383, A5B00075495685 ¢ ¢ ¢ ¢ Issued b y Siemens COM CPE © Siemens AG 2 005 Al l rights reserved. [. . . ]