User manual SIEMENS EA645GE11

[. . . ] If the appliance changes owners, this documentation should always be included. Check the appliance for damage after unpacking it. Do not switch on the appliance if it is damaged. Safety information for this appliance This appliance is intended for domestic use only. This appliance must only be used for food preparation. [. . . ] aluminium) Action Remove spills immediately with a glass scraper. Only use cleaning agents which are suitable for ceramic Do not use the hob as a work surface or storage space. Only use cleaning agents which are suitable for ceramic Lift the pots and pans when moving them. Sugar, food with a high sugar content Remove spills immediately with a glass scraper. Environmental protection Unpack the appliance and dispose of the packaging in an environmentally-responsible manner. Tips for saving energy Environmental protection This appliance is labelled in accordance with the European Directive 2002/96/EU concerning used electrical and electronic appliances (WEEE ­ waste electrical and electronic equipment). The guideline determines the framework for the return and recycling of used appliances as applicable. Always use the right lid for the pan in question. Cooking without the lid requires four times as much energy. Using cookware with uneven bases increases energy consumption. The diameter of the base of your pot or pan should match the size of the hotplate. In particular, if pots that are too small are placed on the hotplate, energy is wasted. Please note: Cookware manufacturers often specify the diameter of the top of the pan. This is usually bigger than the diameter of the base of the pan. Use a small pan for small quantities of food. A larger, less full saucepan requires more energy. It also preserves vitamins and minerals in vegetables. Switch to a lower heat setting as soon as possible. For longer cooking times, you can switch the hotplate off 5 - 10 minutes before the end of the cooking time. 3 Getting to know your appliance The instruction manual is the same for various different hobs. An overview of the models with their dimensions is given on page 2. Hotplate and residual heat indicators The hotplate and residual heat indicators e light up when a hotplate is warm: The hotplates Hotplate $ Single-circuit hotplate ð Dual-circuit hotplate To activate: turn the hotplate control clockwise to ð. To switch off: turn the hotplate control to 0 and reset. Never turn the hotplate control beyond the ð symbol to 0. Activating and deactivating Hotplate indicator - during operation, shortly after you have switched on a hotplate. Residual heat indicator - after cooking, when the hotplate is still warm. You can use the residual heat to save energy, e. g. to keep a small dish warm or to melt chocolate. æ Extended To activate: Turn the hotplate control clockcooking zone wise to æ. To switch off: turn the hotplate control to 0 and reset. [. . . ] E number and FD number: Please quote the E number (product number) and the FD number (production number) of your appliance when contacting the after-sales service. The rating plate bearing these numbers can be found on the appliance certificate. Please note that a visit from an after-sales service engineer is not free of charge, even during the warranty period. Please find the contact data of all countries in the enclosed customer service list. 5 To book an engineer visit and product advice GB 0844 8928999 Calls from a BT landline will be charged at up to 3 pence per minute. [. . . ]