User manual SIEMENS EC64021LT

[. . . ] 7 . 7 . 7 . 8 . 9 10 10 10 12 12 12 13 15 15 15 16 16 16 16 17 18 18 18 18 19 19 20 20 21 22 21 23 24 24 24 24 25 26 3 Operating instructions. . Dear customer, Congratulations on your choice and thank you for purchasing one of our appliances. This practical, modern and functional appliance is manufactured using materials of the highest quality which are subject to strict quality control checks throughout the entire manufacturing process. The appliance is meticulously tested to ensure that it meets your demands and produces perfect cooking results. [. . . ] The following steps must be taken to remove the grease splash tray: 13 - Remove all the burner covers, pan supports and control knobs. Use the disassembly lever 483196 availablle from our Technical Assistance Service. To release the front clips, apply the lever to the area shown in figure 10. Fig. 10 To assemble the grease splash tray again, proceed in the reverse order to removal. It is important that all the seals are refitted to form a seal. These devices are essential for the correct operation of the appliance as they prevent liquids and dirt from entering the appliance. In the event of a malfunction, change the whole tap. Fig. After finishing, the sticker indicating the new type of gas must be placed close to the specifications plate. 14 Operating instructions Burner locations 4 1 5 4 1 5 6 2 3 3 2 7 48 1 2 3 4 5 6 7 8 Pan supports Control knobs Auxiliary burner (up to 1 kW) Semi-rapid burner (up to 1, 75 kW) Rapid burner (up to 3 kW) Double-flame burner (up to 3, 3 kW) Double-flame burner (up to 5 kW) Timer There are indications to show which burner each control knob operates. 12 The gas burners Operation It is essential to ensure that all the burner parts and pan supports are correctly installed for the appliance to work correctly. 14 15 Switching on automatically If your cooktop can be switched on automatically (ignition sparkers): 1. Press the chosen burner control knob and turn it anticlockwise to the maximum power setting. by opening a window) or more effective ventilation (e. g. by increasing the cooktop's ventilation, if possible). If the burner flames are accidentally blown out, switch off the burner operating control knob and do not try to relight it for at least one minute. Use "Large" setting to bring the pan to the boil, then adjust the flame between "Large flame" and "Economy flame" to maintain the required pan temperature. Important: 17 The use of a cooktop leads to the production of heat and moisture in the kitchen. For this reason make sure that the room is properly ventilated. Keep natural ventilation openings, such as windows, open or provide a mechanical ventilation device (e. g. An orangy flame is normal and simply indicates the presence of salt in the atmosphere (from cooking). If the flame has yellow patches, this is not a fault (of any kind). Suitable pans The chart below gives the correct pan usage for each burner Burner Semi-rapid burner Rapid burner Double flame burners Auxiliary burner 12 cm Minimum pan diameter 14 cm 22 cm 22 cm 16 cm Maximum pan diameter 20 cm 26 cm Accessories Additional wok pan support Wok pan Depending on the model, the hob may include the following accessories. These are also available from the Technical Assistance Service. Additional wok pan support: to be used exclusively on double flame burners with concave-based pans. Using these pans may cause some temporary deformation of the grease splash tray. [. . . ] The ring cover of the double or triple flame burner and stainless steel parts such as hotplate rings, top sheet and the area around the burners may become discoloured over time. This is normal because of the high temperatures. Each time the appliance is used these parts should be cleaned with a product that is suitable for stainless steel. The stainless steel cleaner must not be used in the area around the controls. [. . . ]