User manual SIEMENS EC675PB21E

[. . . ] 14 Produktinfo Additional information on products, accessories, replacement parts and services can be found at www. You will only be able to use your appliance safely and effectively when you have read them. These operating and installation instructions should be retained, and passed onto the buyer if the appliance is sold. The manufacturer is exempt from all responsibility if the requirements of this manual are not complied with. [. . . ] Always follow the manufacturer's instructions when cooking with a wok pan. simmer Cap Lid specially designed to cook at minimum power. For its use, the Simmer Cap needs to be placed on the auxiliary burner cap. Code HZ298107 HZ298110 HZ298114 HZ298105 HZ298128 HZ298103 Additional wok pan support: cast iron Additional wok pan support: steel enamel Additional coffee maker support Simmer Plate Simmer Cap Wok pan The manufacturer accepts no liability if these accessories are not used or are used incorrectly. Gas burners There are indications to show which burner each control knob operates. Turn the control knob to the required setting. If after 15 seconds the flame does not ignite, switch off the burner and open a nearby window or door. Wait at least one minute before trying to switch the burner back on. If it does not come on, turn the control knob to the off setting and repeat the steps above. This time, press and hold the control knob for longer (up to 10 seconds). Safety system It is essential to ensure that all the burner parts and pan supports are correctly installed for the appliance to work correctly. Depending on the model, your hob may have a safety system (thermocouple) that prevents the flow of gas if the burners accidentally switch off. wKHUPRFRXSOH LJQLWLRQ VSDUNHU Switching on manually 1. Press the chosen burner control knob and turn it To ensure that this device is active: 1. Without releasing the control knob, press and hold it down anticlockwise to the required setting. Use any type of lighter or flame (cigarette lighter, matches, firmly for 4 seconds after lighting the flame. Switching off a burner Turn the corresponding control knob clockwise to the 0 setting. Switching on automatically If your hob can be switched on automatically (ignition sparkers): 1. Press the chosen burner control knob and turn it anticlockwise to the maximum power setting. While the control knob is still pressed down, sparks are produced on all burners. 11 Power levels The progressive control knobs can be used to control the power needed, from minimum to maximum power. Setting High flame Low flame Ú ˜ ™ Keep the burner as clean as possible. [. . . ] This will prevent food remains from sticking to the hob surface and you will save yourself any unnecessary effort. Due to the high temperatures endured, the wok burner and the stainless steel zones (grease drip tray, burner outline, etc. After each use, clean these areas with a product that is suitable for stainless steel. It is recommended that the cleaning product available from our Technical Assistance Service (code 464524) is used regularly. [. . . ]