User manual SIEMENS ER326AB70E

[. . . ] 15 15 3 Dear customer, Congratulations on your choice and thank you for purchasing one of our appliances. This practical, modern and functional appliance is manufactured using materials of the highest quality which are subject to strict quality control checks throughout the entire manufacturing process. The appliance is meticulously tested to ensure that it meets your demands and produces perfect cooking results. Do not remove the appliance from its protective packaging until it is installed in the unit. [. . . ] 9 kW) Control knob Control knob These individual appliances can be combined and/or with conventional hobs of the same make, using the joint accessory. 1 There are indications to show which burner each control knob operates. It is essential to ensure that all the burner parts and the pan supports are correctly installed for the appliance to work correctly. Press the chosen burner control and turn it anticlockwise to the required setting. Switching on automatically If your hob features the automatic ON function (ignition sparkers): 1. Press the chosen burner control and turn it anticlockwise to the maximum power setting. While the control is still pressed down, sparks are produced on all burners. The flame ignites (it is no longer necessary to press down the control). Turn the control to the required setting. 8 If it does not come on, turn the control to the off setting and repeat the steps above. This time, press and hold the control for longer (up to 10 seconds). If after 15 seconds have elapsed, the flame does not ignite, switch off the burner and open a nearby window or door. Wait at least one minute before trying to switch the burner back on. Safety system Depending on the model, your hob may have a safety system (thermocouple) that prevents the flow of gas if the burners accidentally switch off. To ensure that this device is active, switch on the burner as usual and, without releasing the control, press and hold it down firmly for 4 seconds after lighting the flame. Thermocouple Ignition sparker Switching off a burner Power levels Setting Turn the corresponding control clockwise to the 0 setting. The progressive control knobs can be used to control the power needed, from minimum to maximum power. Ú Control off Maximum capacity or aperture and electricity on Minimum capacity or aperture Large flame ™ š Economy flame For dual double-flame burners, the inner and outer flames can be controlled separately. The available power levels are as follows: Inner and outer flame on full power. Warnings It is normal to hear a slight whistling noise while the burner is operating. When it is first used, it is normal for the burner to give off odours; this does not pose any risk and does not indicate a malfunction; they will disappear in time. A few seconds after the burner is switched off, a sound (thud) will be produced. [. . . ] If the pan supports are fitted with rubber rests, ensure that these are also cleaned. The appliance is not earthed, is poorly connected or the earthing is faulty. The burner flame is not The burner components are not correctly uniform. The gas flow is not normal or there is no gas. [. . . ]