User manual SIEMENS GIGASET A120 DUO

[. . . ] EN Dear Customer, Gigaset Communications GmbH is the legal successor to Siemens Home and Office Communication Devices GmbH & Co. KG (SHC), which in turn continued the Gigaset business of Siemens AG. Any statements made by Siemens AG or SHC that are found in the user guides should therefore be understood as statements of Gigaset Communications GmbH. Sehr geehrte Kundin, sehr geehrter Kunde, die Gigaset Communications GmbH ist Rechtsnachfolgerin der Siemens Home and Office Communication Devices GmbH & Co. [. . . ] Use the battery pack as directed in these instructions (page 7). The operation of medical appliances may be affected. Be aware of the technical conditions within the particular environment (e. g. The handset may cause an intrusive 'hum' in hearing aids. Do not hold the handset against your ear while it is ringing (incoming call). Dispose of the battery pack and telephone in accordance with environmental regulations. Do not pollute the environment. Emergency numbers cannot be dialled if the keypad lock (page 3) is activated!Not all of the functions described in this manual are available in all countries. 2 Setting up the telephone for use Step 1: Connecting the base Step 3: Registering the handset to the base and charging the battery pack Place your handset in the base with the display facing forwards. The handset will now register automatically to the base. For procedure see page 4. Charging the battery pack 1 2 Connect the phone jack with the phone cord 1 and the mains units (230 V) with the power cord 2 as shown. The two cords must be plugged in at all times. Use only the mains unit supplied (see the bottom of the base). If you ever purchase another phone cord from a store, ensure that the phone conductors are correctly connected: 3-4 connection of the telephone conductors/EURO CTR37. The range may be affected if the telephone is wall mounted. To charge the battery pack, leave the handset in the base for approx. The charge status of the battery pack is correctly displayed only after uninterrupted charging/discharging. You should not therefore interrupt the charging process. End the call/cancel dialling: Press the end call key a. Using the directory and other lists Directory and speed dial list These two lists are used in the same way. Directory: Can store up to 20 numbers and associated names. Speed dial list: Can store up to 8 numbers (12 digits max. ), e. g. private phone numbers, prefixes of network providers ("Call-by-Call") etc. Press the h or C key to open the required list then press MENU. The following functions are available: EDIT ENTRY NEW ENTRY SHOW ENTRY DELETE ¢c. Answering a call Your handset rings and you wish to take the call: Press the talk key c. If "Auto Answer" is active (page 6) just lift the handset out of its base/charging cradle. Add/edit number and use to dial Save new phone number Show/edit number Delete a single entry Calling Line Identification When you get a call, the caller's number will be displayed on your handset; the caller's name will be displayed if it is stored in the directory . [. . . ] KG, declare that this device meets the essential requirements and other relevant regulations laid down in Directive 1999/5/ EC. A copy of the 1999/5/EC Declaration of Conformity is available at this Internet address: http://www. siemens. com/gigasetdocs. Care Wipe the base station and handset with a damp cloth or an antistatic wipe. This can cause static! Contact with liquid ! If the handset has come into contact with liquid: 1 Switch the handset off and remove the battery pack immediately. 2 Allow the liquid to drain from the handset. [. . . ]