User manual SIEMENS GIGASET A49H

[. . . ] Em status ocioso, use a tecla t para ativar o menu para definir o volume da chamada e use a tecla u para definir o volume. Durante as chamadas, use a tecla t para ativar o menu para configuração do volume do viva-voz e use a tecla u para definir o volume. 1 Charge status of the batteries 2 Display keys 3 Message key Flashes: new messages received 4 A39H: h Directory key A49H: n Handsfree key 5 Control key (u) 6 Talk key 7 r Directory key (press down on the control key) 8 End call key and On/Off key 9 Ringer tone on/off (press and hold in idle status) 10 Keypad lock on/off (press and hold) 11 Recall key - Consultation call (flash) - Dialling pause (press and hold) 12 Microphone 13 "Microphone off" key Please note Charge the handset for 18 hours before first use. Display key on handset: Pressing a key launches the function that appears above that key in the display. [. . . ] You must activate manual registration of the handset on both the handset and the base station. The following is displayed after succesful registration: If more than one handset is registered, the internal number of the handset is shown in the upper left corner. The correct charge level can only be displayed if the batteries are first fully charged and discharged. ¤ Then remove the handset from the base station or charging cradle and do not replace it until the batteries are completely discharged. After the first battery charge and discharge you may replace your handset Always repeat the charging and discharging procedure if you remove the The batteries may warm up during charging. Warning Please ensure that the handset is in the charging cradle if you are absent for a long time (e. During holidays) or remove the batteries from the handset. Otherwise the batteries could be damaged. After the initial charging procedure a complete charging to full capacity takes at least 18 hours. Set the date and time so that the correct date and time can be assigned to incoming calls, and so that the alarm can be used. MENU Settings OK Date/Time OK Date: ~ (enter the day, month and year in 6-digit format) OK Time: ~ (enter hours and minutes in 4-digit format) OK a (press to return to idle status) Please note When entering the time and date, you can move the position of an entry to the left or right by pressing the control button up or down. Once the phone is registered and the time set, the idle display is shown as in this example. If more than one handset is registered, the internal number of the handset is shown in the upper left corner. If you have any questions about using your phone, please read the tips on troublepage 12) or contact our Customer Care shooting ("Questions and answers" team page 13. Making external calls and ending calls External calls are calls using the public telephone network. ~ (Enter the phone number) The phone number is dialled. (Or you can first press and hold c to hear the dial tone and then enter the number. ) During the call you can adjust the earpiece volume using t and set the volume with u. You can mute your handset when making external calls. Your caller can no longer hear you but you can still hear them. Press the Mute key m during the call to activate/deactivate the function. Activating while dialling: Enter the number ~ and press the handsfree key d. [. . . ] Old Call: entry already To return calls using the incoming calls list, your phone's area code ("local area code") must be stored. For further information, please see your phone's user guide. Precondition: CLIP (¢ page 8) Depending on the type of list set (¢ page 14), the calls list contains: answered calls missed calls Depending on the type of list set, all numbers of the last 25 incoming calls are saved or just the missed calls are saved. Number of new entries + number of old, read entries All old and new entries will be deleted. [. . . ]