User manual SIEMENS GIGASET A680

[. . . ] 1 Gigaset A680 Handset 1 Charge status of the batteries 2 Display keys 3 Message key Flashes: new messages received 4 Handsfree key 5 Control key (u) 6 Talk key 7 Directory key (press down on the control key) 8 End call key and On/Off key 9 Ringer tone on/off (press and hold in idle status) 10 Keypad lock on/off (press and hold) 11 Recall key - Consultation call (flash) - Dialling pause (press and hold) 12 Microphone 13 Alarm clock key Base station Registration/Paging key (page 9) 1 09. 22 INT 2 3 4 5 6 7 8 11:56 MENU V 9 10 11 12 13 Display keys: Pressing a key launches the function that appears above that key in the display. Display INT MENU Function when pressed Call other registered handsets page 9. Open main/submenu (see Menu tree page 13). Backspace deletes one character at a time. [. . . ] You can save up to 50 phone numbers (max. 32 digits) with corresponding names (max. Enter letters/characters page 11. ¢c. ¢ Saving the first number in the directory h ¢ New Entry?¢ OK ¢ ~ (enter number) ¢ OK ¢ ~ (enter number) ¢ OK Storing a number in the directory h ¢ MENU ¢ New Entry ¢ OK ¢ ~ (enter number) ¢ OK ¢ ~ (enter number) ¢ OK Selecting a directory entry Open the directory with h. You have the following ¢ Accepting a call The handset indicates an incoming call by ringing and by a display on the screen. Press the talk key c to accept the call. When Auto Answer is activated (see Menu tree page 13), simply remove the handset from the base station/charging cradle. In idle status, use t to activate the menu for setting the call volume and use u to set the volume. ¢ options: Use u to scroll through the entries until the required name is selected. Enter the first character of the name and scroll to the entry with u, if required. Calling Line Identification When you get a call, the caller's number will be displayed on your handset; the caller's name will be displayed if it is stored in the directory. Preconditions: 1 You have asked your network provider for the caller's number (CLIP) to be displayed on your handset screen. 2 The caller has asked the network provider for his number to be identified (CLI). ® appears in the display if you have not requested Calling Line Identification, Withheld appears if the caller has withheld CLI, and Unavailable appears if CLI has not been requested. Dialling with the directory h ¢ u (select entry) ¢ c Using other functions h ¢ u (select entry) ¢ MENU New Entry Show Number Use Number The following functions can be selected with u: Save new phone number. If necessary, use u to select another entry. Delete Entry Delete List Edit or add to the number. Then dial or use other functions with MENU. Delete all entries. u (select entry) ¢ MENU Delete Entry Copy to Dir. Date/Time Status The following functions can be selected with u: Delete current entry. Call date and time (if set). New Call: new missed call. Answ. : call taken. Delete List Warning!All old and new entries will be deleted. Calling back a caller from the calls list f ¢ CallsList 01+02 ¢ OK ¢ u (select entry) ¢c Assigning key 1 for fast access to the network mailbox Simply press and hold key 1 on the handset and you will be connected directly to the network mailbox. See Menu tree page 13. ¢ 9 Locating a handset ("paging") You can locate your handset using the base station. Briefly press the registration/paging key on the base station (¢ page 1). [. . . ] Problem Nothing appears in the display. Cause Solution No wireless connection to the base station, Base flashes in the display. You cannot hear a ringer/ dialling tone from the fixed line network. Error tone sounds after system PIN prompt. PIN forgotten. The handset is not Press the end call switched on. 5 seconds or place the handset in the base station. The batteries are Charge or replace the flat. [. . . ]