User manual SIEMENS GIGASET AS300

[. . . ] 1 Gigaset AS200/AS200A/AS300 The handset at a glance 1 Charge status of the batteries 2 Answer machine icon (AS200A only) 3 Display keys 4 Message key Flashes: new messages received 5 AS200/AS200A: h Directory key AS300: d Handsfree key 6 Control key (u) 7 Talk key 8 AS300: h Directory key (press down) 9 End call and On/Off key 10 Ringer on/off (press and hold in idle status) 11 Keypad lock on/off (press and hold) 12 Recall key - Consultation call (flash) - Dialling pause (press and hold) 13 Microphone 14 "Microphone off" key Display keys on handset: Pressing a key launches the function that appears above that key in the display. 1 2 Display icon INT Function when pressed 11. 12. INT 3 4 5 6 7 8 9 ± 11:56 MENU V MENU ¢ " U T ~ OK Call other registered handsets page 11. Open main/submenu (see Menu tree page 16). Backspace deletes one character at a time from right to left. [. . . ] Now say your announcement (at least 3 seconds). Press OK to confirm or press a or " to reject your recording. After recording, the announcement is played back for you to check. Please note: Recording ends automatically when the max. recording time of 170 seconds is reached or if there is a break in speaking of more than 2 seconds. Playing back or deleting announcements See Menu tree ¢ page 16. Playing/deleting messages Open the voicemail list to play back messages. Stopping and controlling playback During message playback: 2 t v Stop playback. Go to the next message but one. 2xt 2xv 10 Deleting individual messages While playback is paused, press the ~ display key. Deleting all old messages During playback or pause: MENU ~ (Enter your own number and allow the phone to ring until you hear the message: "Please enter PIN") ¢ ~ enter system PIN prompt) ¢ Delete all old ¢ OK (confirm the security Your answer machine is activated. It tells you how much memory time is left. The answer machine cannot be deactivated remotely. Picking up a call from the answer machine You can still accept a call while the answer machine is recording the message by pressing c . Recording stops and you can speak to the caller. Locating a handset ("paging") You can locate your handset using the base station. Briefly press the registration/paging key on the base station (¢ page 1). All handsets will ring simultaneously ("paging"), even if the ringer tones are deactivated. End paging: briefly press the registration/paging key on the base station (¢ page 1) or the talk key c on a handset. Setting up the answer machine The answer machine has already been preset at the factory. Make individual settings using the handset. Details on how to set a delay time, after which the answer machine is to answer a call, as well as details on how to set the recording length and activate call screening during the recording, are available from the Menu tree page 16. ¢ Assigning key 1 for fast access to the answer machine (network mailbox) Simply press and hold key 1 on the handset and you will be connected directly to the answer machine (network mailbox). See Menu tree page 16. Registering handsets You can register up to four handsets on your base station (Gigaset AS200/AS300) recommended). Please note: Each additional handset must be registered on the base station in order for it to work properly!For automatic registration of handsets to Gigaset AS200/AS200A/AS300 page 5. ¢ Remote operation when on the move You can check and activate your answer machine from any other telephone (hotel, pay phone etc. ). Requirements: You have set a system PIN other than 0000 page 17. The phone you are using for remote operation has touch tone dialling (DTMF), i. e. you hear different tones when you press the keys. ¢ Manual registration of handsets to Gigaset AS200/AS200A/AS300 1. [. . . ] Components on the printed circuit board are manipulated The software is manipulated Defects or damage caused by dropping, breaking, lightning or ingress of moisture. This also applies if defects or damage was caused by mechanical, 16 Menu tree Your phone has an extensive range of features. To select a function while the phone is in idle status, press MENU (open menu), use the t and v keys to scroll to the function you require and press OK to confirm. 1 Alarm Clock Activating/deactivating the alarm clock Input format: HHMM To return to idle status: press and hold the a key. As an alternative to selecting functions using the t and v buttons, you can also enter the digit combination that is in front of the function in the menu tree. [. . . ]