User manual SIEMENS GIGASET C340

[. . . ] Gigaset C340 / CHIN eng / A31008-M1621-Y101-1-7619 / overview. fm / 14. 9. 05 Handset at a glance Handset at a glance 1 INT 1 V 2 05. 08. 16 14:30 §§§§INT§§§ §§Menu 12 11 10 3 4 5 9 8 6 7 1 Display in idle status 2 Battery charge condition = e V U (empty to full) = flashes: battery nearly empty e V U flashes: battery charging 3 Control key (page 8) 4 Message key Opens calls lists. 5 End call key, On/Off key End call, cancel function, go back one menu level (short press), back to idle status (long press), activate/deactivate handset (long press in idle status) 6 Hash key Keypad lock on/off (long press, page 7) 7 Microphone 8 Recall key Enter recall (long press) 9 Star key Ringers on/off (long press in idle status), Enter dial pause (long press when dialling), Switch between upper/lower case letters and digits for text entry (page 28) 10 Talk key Answer a call, open last number redial list (short press), start dialling (long press) 11 Handsfree Key Switch between earpiece and handsfree mode; Lights up: handsfree activated; Flashes: incoming call 12 Timer key (page 23) Start and end timer 1 Gigaset C340 / CHIN eng / A31008-M1621-Y101-1-7619 / C340_laender_IVZ. fm / 14. 9. 05 Contents Contents Handset at a glance . 4 Gigaset M56 ­ More than just a telephone . Activating/deactivating the keypad lock . [. . . ] Registering the handset to the Gigaset M56 base is automatic. ¤ Place the handset in the charging cradle of the base unit with its display facing forward. Automatic registration takes around one minute. While this is happening, Registering appears in the display and the name of the base, Base 1, flashes. The handset is given the lowest available internal number (1­4). When the handset has registered, this number appears in the display, e. g. This means that the handset has been allocated the first internal number. If all internal numbers 1­4 have been assigned (four handsets are registered on a base), the number 4 is overwritten if that handset is in idle status. ¢ Settings ¢ Handset ¢ Register Handset ~ Enter the system PIN of the base (the default is 0000) and press §OK§. Registering Base 1 flashing in the display. Menu§ On the handset On the base ÷ Press the registration/paging key on the base and hold for about 3 seconds. De-registering handsets From any registered Gigaset M56 handset you can de-register any other registered handset. The handset which you are using is highlighted by <. s Select the handset you wish to de-register. s De-register Handset select and press §OK§. §OK§ Press the control key. Notes: ­ Automatic registration is not possible when the base on which you wish to register the handset is being used to make a call. ­ A key press cancels automatic registration. ­ The name of the handset can be changed (page 19). Looking for a handset ("paging") You can look for your handset with the help of the base. ¤ Briefly press the registration/paging key on the base. ¤ All handsets will ring together ("paging") even if their ringers are switched off. 17 Manually registration of a Gigaset M56 handset to a Gigaset M56 base station You must activate manual registration of the handset at both the handset and the base station. Gigaset C340 / CHIN eng / A31008-M1621-Y101-1-7619 / registration. fm / 14. 9. 05 Using several handsets End paging ÷/c Briefly press the registration/ paging key on the base or press the talk key on the handset. Making internal calls Internal calls to other handsets registered on the same base are free. When the internal party answers: ¤ Announce the outside call if you wish. The call will come back automatically if the internal party does not answer or is busy. Internal consultation calls While talking to an outside party, you can call an internal user to consult with him or her. The external caller hears the music on hold. s Select the required handset and press §OK§. Calling a specific handset INT sc Or: ~ Open list of internal users. Select a handset and press the talk key. [. . . ] u The first letter of the name of directory entries is automatically capitalised, followed by lower case letters. Editing text When you press a key and hold it, the characters of that key appear in the bottom display line and are highlighted one after the other. When you release the key the highlighted character is inserted into the input field. The display briefly shows whether upper or lower case letters or digits are selected when you switch from one mode to the next: The bottom text line displays "abc -> Abc", "Abc -> 123" or "123 -> abc". Ic¼ Pause: Line seizure 3 s Pause: Recall key System PIN Dialling mode Default settings of the handset Function Battery tone/Key click/Confirmation tone Auto talk Baby alarm Baby alarm: sensitivity/number Display language Default setting Page on page 22 on off high/empty country-specific page 21 page 20 page 20 page 21 page 21 page 22 page 21 page 29 ~ hgi T §Menu 1 2 Order of directory entries The directory entries are usually sorted in alphabetical order. [. . . ]