User manual SIEMENS GIGASET C590 IP

[. . . ] Gigaset C590 IP your perfect companion Gigaset C590 IP your perfect companion . . . Go crazy for the vibrant 3. 5" TFT display and first-class sound quality. Your Gigaset can do a lot more than just make calls: Ethernet port Connect your Gigaset to the Internet and your PC via Ethernet. Use your public and private directories on the Internet ( page 78). [. . . ] u Activating the function significantly reduces the operating time of your handset. If necessary, place the handset in the charger. This ensures that the battery does not run down. u Ideally the handset should be positioned 1 to 2 metres away from the baby. The microphone must be pointed towards the baby. u The connection that the room monitor is diverted to must not be blocked by an activated answering machine. 124 Using a handset as a room monitor v Additional Features Room Monitor You can enter data in the following fields: Activation: Select On to activate. External number: select the number from the directory (press display key ) or enter it directly. Internal number: press the display key Change select the handset or Call All to call all registered handsets OK. In idle status, the destination number or the internal destination number is displayed. When the room monitor function is activated, the idle display looks like this: i V Activating the room monitor and entering the destination number INT 1 Room Monitor 0891234567 OFF Options 07:15 22 Oct Changing the destination number saved v Additional Features Room Monitor Enter and save number as described in "Activating the room monitor and entering the destination number" ( page 125). Cancelling/deactivating the room monitor Press the end call key a to cancel the call when the room monitor is activated. In idle status, press the display key OFF to deactivate room monitor mode. 125 Using a handset as a room monitor Deactivating the room monitor remotely Prerequisites: u The telephone must support tone dialling u The room monitor call is diverted to an external destination number. u If room monitor is activated via a VoIP connection, the DTMF signalling must be done via SIP info or RFC2833 ( page 176). Accept the call from the room monitor and press keys 9 ;. The room monitor function will deactivate after the call ends. There are no further room monitor calls. The other room monitor settings on the handset (e. g. , no ringtone) remain activated until you press the display key OFF on the handset. To reactivate the room monitor function with the same phone number: Reactivate and save with Save ( page 125). 126 Connecting/using other handsets Connecting/using other handsets You can register up to six handsets and six Gigaset repeaters to your base. Each registered device is assigned an internal number (1 6) and an internal name (INT 1 INT 6). You can change the number assignment and names. If all internal numbers have already been assigned on your base, you must deregister a handset that is no longer required before registering a new one. When you register a Gigaset handset, the base transfers entries for the following online directories to the local directory on the handset to enable you to use the online directories on your new handset as well. Prerequisite: the handset can send and receive directory entries (see handset user guide). u The online directory currently set ( page 178) with a provider-specific name. u The Yellow Pages currently set ( page 178) with a provider-specific name. [. . . ] 202 Interface language Web configurator . 161 H Handset activating/deactivating . 127 215 Index Internal conference . 129 Lock activating/deactivating keypad lock . [. . . ]