User manual SIEMENS GIGASET CX203

[. . . ] EN Dear Customer, Gigaset Communications GmbH is the legal successor to Siemens Home and Office Communication Devices GmbH & Co. KG (SHC), which in turn continued the Gigaset business of Siemens AG. Any statements made by Siemens AG or SHC that are found in the user guides should therefore be understood as statements of Gigaset Communications GmbH. Sehr geehrte Kundin, sehr geehrter Kunde, die Gigaset Communications GmbH ist Rechtsnachfolgerin der Siemens Home and Office Communication Devices GmbH & Co. [. . . ] Precondition: N Remote control from an external connection is only possible if you have defined an AM PIN (page 79). You must always enter the AM PIN when operating from an external device. N To be able to operate an answering machine from an external device fully (change settings, delete messages) you must enable remote control and remote delete (see below). Notes on remote control If a function requires two keys to be pressed, then you must press both keys within 4 seconds. Otherwise the entry is terminated or only the function of the second key is carried out. If you press the wrong key first you can press E to cancel the wrong entry. You can call up voice-guided help for some functions: 0; :; F; 9; Help with deletion Help with new messages/phrases Help with recording Help with different operating modes Enabling remote control and remote delete When the phone is supplied, remote control and remote delete are deactivated. You must enter the settings for each of the three answering machines you wish to operate remotely. Preconditions: N You have selected an answering machine (page 62). N To activate Remote control: You have assigned a PIN to the selected answering machine (page 79). s Settings s Remote options Remote control OK OK Select the menu item and confirm. Set remote control: Select the menu item and confirm ( = activated). If required, set remote delete: Select the menu item and confirm ( = activated). OK s Remote delete OK 71 Operating the answering machine (on CX253isdn) Introduction to remote operation while you are away from home For remote control you need a telephone that transmits DTMF tones (tone dialling). It is important to enter the AM PIN immediately while the announcement is being played. In addition Remote control and, if required, Remote delete must be activated. ~ ~ Dial your own telephone number. When the announcement starts, enter the AM PIN at once. If the AM PIN is entered three times incorrectly in succession, the connection is interrupted. After this you can operate the answering machine using the key commands (page 73). Introduction to remote operation from a handset (internal) Added-feature and standard handset [RRRRRRRRRRRRRRRRRRRRRRRRRRR] INT Press the display key. Enter internal phone number for the answering machine: 91 for AM1, 92 for AM2 or 93 for AM3. If the AM lock has been set (page 79), enter the AM PIN. ~ ~ Handset made by another manufacturer (GAP mode) Lift the handset and if necessary, press another key to initiate an internal call. ~ ~ Enter internal phone number for the answering machine: 91 for AM1, 92 for AM2 or 93 for AM3. If the AM lock has been set (page 79), enter the AM PIN. Cordless phone adapter and normal telephone Automatic line seizure must be activated. As supplied, automatic line seizure is activated!Lift the receiver and then: ~ ~ Enter internal phone number for the answering machine: 91 for AM1, 92 for AM2 or 93 for AM3. If the AM lock has been set (page 79), enter the AM PIN. 72 Operating the answering machine (on CX253isdn) Key sequences for remote control Once you have initiated remote control of the answering machine, the functions of the keys are the same for all telephones. [. . . ] 7 Pre-setting the call forwarding destination . 46, 55 Record Announcement (answering machine) . 97 Remaining memory time (answering machine) . 154 Remote control (answering machine) . [. . . ]