User manual SIEMENS GIGASET IPS675IP

[. . . ] This document is a supplement to the user guide for the following Gigaset VoIP phones: Gigaset C470 IP, Gigaset C475 IP, Gigaset S675 IP and Gigaset S685 IP In the time since the user guides were completed, the functionality of these devices has been increased (firmware version 02. These changes are described in this document. This document is a supplement to the user guide for Gigaset S685 IP devices manufactured before May 2009. The user guide can be found on the CD supplied with the device. [. . . ] Net calls you will not be able to hear the caller. ¤ Select Yes if you want your phone to use STUN. You can activate the fixed line network connection on your phone as an alternative connection. If an attempt to establish a connection via VoIP then fails, an attempt is made automatically to establish the connection via the fixed line network. An alternative connection would be used in the following cases: u your VoIP connections are busy u the SIP server for the VoIP connection cannot be accessed u the dialled VoIP connection has not yet been configured or has not been configured correctly (e. Because your router is deactivated or not connected to the Internet. U SMS messages that are to be sent via a VoIP connection are not sent via the fixed line Your handset's message key will flash. U If you enter a VoIP line suffix (#1 to #6) or press the §IP§ display key before dialling, the connection is not established over the fixed line network as an alternative. U If you dial a URI or IP address instead of a phone number, the connection cannot be established via the fixed line network. Description of new and updated functions R key function for VoIP ­ Hook flash/call diversion ¤ If you want to activate the fixed line network connection as an alternative connection, ¤ Now select Set to activate your settings. This section replaces/amends the sections "Web configurator ­ Defining recall key functions for VoIP (hook flash)" in the user guide for your Gigaset VoIP phone. Using your phone's Web configurator, you can assign a special feature of your VoIP provider to the S key. Alternatively, you can use the S key for call diversion (call transfer). To be able to use a special feature of your VoIP provider, your phone must send a specific signal (data packet) to the SIP server. You can assign this "signal" to your phone's R key. If you press the R key during a VoIP call the signal will be sent to the server. The SIP Info option on this web u The S key is not used for call transfer, i. Use the R key to initiate call transfer with the SIP If one of these preconditions is not fulfilled, the field in the Hook Flash (R-key) area is hidden. 15 characters), enter the data that you have received from your VoIP provider. Description of new and updated functions R key function for VoIP ­ Hook flash/call diversion Configuring the S key for call diversion (call transfer) If you are transferring calls via VoIP connections, you can connect the two external callers (provider-dependent). You can configure settings for this type of call transfer. Use the R key to initiate call transfer with the SIP Refer method. [. . . ] The proxy or the receiving device has discovered a fault while executing the query. it is therefore impossible to execute the query. If this occurs, the caller or the phone displays the fault and repeats the query after a few seconds. The number of seconds after which the query can be repeated may be transmitted to the caller or phone by the receiving device. [. . . ]