User manual SIEMENS GIGASET N300A IP

[. . . ] Do not use the phone in environments with a potential explosion hazard, e. g. , paint shops. Never expose the telephone to heat sources, direct sunlight or other electrical appliances. Protect your Gigaset from moisture, dust, corrosive liquids and fumes. If you give your phone to a third party, make sure you also give them the user guide. [. . . ] > A web browser is installed on the PC (Internet Explorer from V7. 0, Firefox from V3. 5). > Any existing firewall allows the PC and the phone to communicate. You need the VoIP account to be able to make calls to any other subscribers on the Internet, the fixed line network or the mobile phone network via VoIP. > Set up a VoIP account with a VoIP provider. > Have your VoIP account data you received from your VoIP provider to hand. You need to save this data in the phone, e. g. using the Web configurator on your phone. You will need: > Your registration name (login ID), your password and, if applicable (provider-dependent), a user name (often this is your VoIP phone number). Or > Your personal auto-configuration code (activation code), if your provider supports "automatic configuration". > Instead of using the following procedure, you can also enter the VoIP access data and assign the VoIP connection as a send and receive connection via a Gigaset C59H, SL78H, SL400H or S79H handset registered to the base. > A description of the Web configurator can be found in the long user guide (see enclosed CD) and in the Web configurator online help document. 7 Configuring the VoIP connection 5 Establishing the connection to the Web configurator > Launch the web browser on your PC. > Enter the URL www. gigaset-config. com in the address field of the web browser and press the return key. Alternatively, if a handset is already registered to the base, you can enter the local IP address of your telephone in the address field (e. g. , http://192. 168. 1. 4). You can see the IP address on the handset display by briefly pressing the paging/registration key on the front of the base. You are connected to your base's Web configurator. The following Web configurator page is displayed. The connection between the PC and the Web configurator is a local connection (LAN connection). 8 Configuring the VoIP connection 6 Registering with the Web configurator > If you want to change the interface language of the Web configurator, click on the available languages. list icon. > Select the appropriate language from the list of The Web page is reloaded in the selected language. This may take some time as the web pages for the required language are loaded onto the base from the configuration server. To log in to the Web configurator you will need the system PIN for the phone (default setting: 0000). A Enter your phone's four-digit system PIN in the bottom field. Select the OK button. B The PIN is still set to 0000: A B > In the next window containing the security information, click on OK. 9 Configuring the VoIP connection 7 Entering VoIP data The following web page is displayed: > Select Settings. After the following web page has loaded: > Click on Telephony in the navigation area (to the left of the web page). A list is opened containing all connections that you can assign or configure to your phone. > Click on the Edit button for the first IP1 VoIP connection. For further information on the web pages currently displayed, please consult the online help document. This will open when you click on the question mark to the top right of the web page. 10 Configuring the VoIP connection A web page for configuring the first VoIP connection is displayed. * First load the general provider data onto your base. > To do this, click on the Select VoIP Provider button and then on the Next> button on the following web page. > Click on the list icon and select the country in which you are using your phone from the list. > Click on the Next> button > Click on the list icon and select your VoIP provider from the list. > Select the Finish button. If your VoIP provider is not included in the list, you need to select Other Provider. *. ) Automatic configuration: If your provider supports "automatic configuration", you will receive a "configuration code" instead of an authentication name and password. Enter this code in the Auto Configuration Code field and click on the Start Auto Configuration button. Configuration is performed automatically. Proceed as described under 8 . 11 Configuring the VoIP connection If the provider data has loaded successfully, the message Provider data has been downloaded. > Enter the access data you received from your VoIP provider in the Personal Provider Data fields. > Select the Set button. If you specified Other Provider when selecting your provider, you need to enter the provider data yourself before saving. > To do this, click on the Show Advanced Settings button. If you require assistance in filling in the information, please consult the online help document. This will open when you click on the question mark to the top right of the web page. 12 Configuring the VoIP connection 8 Completing configuration If the Active option next to IP1 is still not activated (you do not see a tick): The list of all possible connections for your phone is displayed again. > Click on the A option. [. . . ] Here you can get competent advice on questions regarding installation, operation and configuration: UK: 08453 6708 12 (local call cost charge) Please note that if the Gigaset product is not sold by authorised dealers in the national territory the product may not be fully compatible with the national telephone network. It is clearly specified on the box near the CE mark as well as on the bottom of the base station for which country/countries the equipment has been developed. If the equipment is used in a manner inconsistent with this advice or with the instructions of the manual and on the product itself, this may have implications on the conditions for warranty or guarantee claims (repair or exchange of product). In order to make use of the warranty, the product purchaser is asked to submit a receipt which proves the date of purchase (date from which the warranty period starts) and the type of goods that have been purchased. [. . . ]