User manual SIEMENS GIGASET S 88

[. . . ] Gigaset 4010 Comfort, CHIN eng, A31008-G4010-C102-1- umschl_v. fm 25. 09. 0 Gigaset S 88 Be inspired User Manual and Safety Precautions Gigaset 4010 Comfort, CHIN eng, A31008-G4010-C102-1- umschl_v. fm 25. 09. 0 General Congratulations Congratulations on your purchase of the Siemens Gigaset telephone system!This phone´s 2. 4 GHz frequency and high-speed digital voice encoding provide reception and voice clarity that is superior to other cordless phones. And, its digital spread spectrum technology will provide you with secure, private conversations. II Gigaset 4010 Comfort, CHIN eng, A31008-G4010-C102-1- umschl_v. fm 25. 09. 0 General Quick Reference Handset Turning on/off the handset (see page 5) hold down a Turning keypad protection on/ hold down ª off (see page 6) Turning tones on/off (see page 40) Making an external call (see page 8) Redialing a number (see page 13) Saving a called number in the directory (see page 19) Dialing from the directory (see page 20) Setting the handset volume (see page 40) hold down « o z if necessary D select entry c z MENU D Send to Dir D o[Name] if necessary c MENU D Sound Settings DF or G Save [ Handset Volume [ D c or D [ c Making an Internal call to a speF and cific handset Making an Internal call to a all handsets (see page 8) Transferring a call to another handset Making a consultation call Setting the date and time (see page 7) Setting the alarm clock (see page 15) D to select internal user c F and D Intercom Call F and D to select internal user [ a MENU D Appoint. /Clock MENU D Appoint. /Clock c F and D to select internal user [ ; end: End Set date and time F G D Save [D Date/Time [ [ Enter settings F G D Save [D Alarm Clock III Gigaset 4010 Comfort, CHIN eng, A31008-G4010-C102-1- umschl_v. fm 25. 09. 0 General Handset Diagram Status LED (light) Lights up during a call; Flashes for: ­ Incoming calls ­ New messages ­ Alarm calls, appointments, anniversaries flashes when low = empty e U full V Charging status 1/3 2/3 Signal strength (strong, medium, weak) Soft keys Navi key Talk key ­ Accept call ­ Dial number Annabella 07 . 19. 01 13:13 Ñ e The soft keys give you access to the function shown in the display. { MENU End call and On/ Off key ­ end call ­ cancel function ­ back one menu level (press briefly) ­ return to idle state (hold down) ­ on/off in idle status (hold down) INT Speakerphone key Switch from handset to speakerphone. 1 4 GHI 7 PQRS 2ABC 5JKL 8TUV 0 3 DEF 6 MNO 9 WXYZ Open directory Key 1 (Programmable) Hold down to select telco voice mailbox Pound key Hold down to turn on and off the keypad protection Star key (*) Hold down to turn on and off the ringer Memory key Accesses speed dial numbers Microphone Using the Navi Key and Soft Keys Soft keys With the right soft keys you can carry out functions that can also be partly controlled with the navi key. The side of the navi key which you must press is indicated in the operating instructions by arrows: Navi key INT F/ G (left/right) E/ D (top/bottom) IV Gigaset 4010 Comfort, CHIN eng, A31008-G4010-C102-1- umschl_v. fm 25. 09. 0 General Functions of the Navi Key The navi key has different functions in specific operating situations. [. . . ] H/Set Settings D åååååååååååååååååååååååååååååååå [ Scroll to Select Base and press OK. Select Base D [ Scroll to the desired base or select Best Base and press OK. 31 Gigaset 4010 Comfort, CHIN eng, A31008-G4010-C102-1-7619 mobilt_an. fm 25. 09. 03 Handset Operation Press keys: Changing the Name of a Handset The names INT 1, INT 2, and so on are assigned automatically. However, you can change these names, for example, to ANNE or OFFICE (10 characters maximum). F Press left on the navi key (INT) and the list of handsets is displayed. Enter the new name. E D Scroll to the desired handset Edit o Save Press Save. Changing a Handset's Intercom Number You can change the number of a handset. F Press left on the navi key (INT) and the list of handsets is displayed. Intercom Intercom Call INT Eric 4 < MENU Four handsets are registered already. "Intercom Call" is only displayed if more than one user is registered. Î MENU Press Menu. handsets are displayed. Assign Number åååååååååååååååååååååååååååååååå [ Scroll to Assign Number and press OK. All registered E D Select the desired handset If necessary: o Enter an available intercom number. E D o Scroll to a different intercom and change it first. [ Press OK to save changes. If the selected intercom telephone number has already been assigned to a different handset, you will hear an error tone (descending tone sequence). 32 Gigaset 4010 Comfort, CHIN eng, A31008-G4010-C102-1-7619 mobilt_an. fm 25. 09. 03 Handset Operation Press keys: Making Internal Calls Internal calls are calls to other registered handsets; they do not require an outside line. For example: F Press INT on the navi key (left side) and the list of handsets is displayed ­ Your own handset is identified by "<" . D E Scroll to the handset you wish to call. c or Press Talk. e. g. Y Simply enter the number of the handset you wish to call and you are automatically connected. a End the call: Press End. Call Forwarding You can forward an external call to another handset. F Press INT on the navi key (left side) and the list of handsets is displayed ­ Your own handset is identified by "<" E D Scroll to the handset you wish to call. c a Press Talk. When the other handset answers, announce the external call then: Press End. Instead of announcing the call, you can immediately press the End key. If the internal user does not answer or if the line is busy the call goes automatically back to you. 33 Gigaset 4010 Comfort, CHIN eng, A31008-G4010-C102-1-7619 mobilt_an. fm 25. 09. 03 Handset Operation Press keys: Consultation Call If you are on an external call you can call another internal handset and conduct a consultation call without hanging up on the external caller. You are automatically reconnected to the external caller when you end the consultation call. F Press INT on the navi key (left side) and the list of handE D c Scroll to the handset you wish to call and press Talk. Ending the Consultation Call: End sets is displayed ­ Your own handset is identified by <. The external caller is put on hold. Press the End softkey - You are now reconnected to the external call. or a Press the End key and the call is transferred to the consulted handset. Accepting or Rejecting a Waiting Call If you receive an external call during an internal call you will hear the call waiting tone if you subscribe to this feature from your local telephone company. Accept Press Accept - The internal call is ended; you are connected to the external call. Press Reject ­You stay connected to the internal user. or Reject Turning the Ringer Off You may turn off the ringer on any handset. « Hold down the star key until the handset does not ring any more. The ringer is permanently off until until you turn it back on. To turn the ringer back on press the star key. 34 Gigaset 4010 Comfort, CHIN eng, A31008-G4010-C102-1-7619 mobilt_an. fm 25. 09. 03 Handset Operation Press keys: Paging all Handsets from the Base (Locating Handsets) Press the Page/Registration buttons on the bottom side of the base station very briefly. All handsets ring at the same time. To End Paging Press the Page/Registration button again. or c Press the Talk key on a handset. 35 Gigaset 4010 Comfort, CHIN eng, A31008-G4010-C102-1-7619 mobilt_an. fm 25. 09. 03 Handset Operation Press keys: Room Monitor You can use any Gigaset S88 handset to monitor a room. If a certain noise level is reached (for example a baby crying or a door opening) the handset will automatically dial the number you stored. When you answer the call you will hear the noises in the room being monitored. [. . . ] This warranty does not apply to defects outside of our control, including but not limited to acts of God, fire, flood, damage while in transit to service facility. We do not warranty that the product will be compatible with any telephone equipment or systems or party lines. This warranty shall be void if the product is damaged as a result of defacement, misuse, abuse, neglect, accidents, destruction, or alteration of the serial number, improper electrical voltages or currents, repair, alteration or maintenance by any person or party other than our authorized service facility or any violation of instructions furnished by us. This warranty is also void if this product is removed from the country in which the original purchaser purchased it, if it is used in a country, which it not registered for use, or if it is used in a country for which it was not designed. [. . . ]