User manual SIEMENS GIGASET S790

[. . . ] S790 - S795 Gigaset Communications GmbH Frankenstr. 2a, D-46395 Bocholt Manufactured by Gigaset Communications GmbH under trademark license of Siemens AG. 2011 Gigaset products bearing the trademark 'Siemens' will exclusively use the trademark 'Gigaset'. Gigaset Communications GmbH 2010 All rights reserved. [. . . ] t or Go to the start of the current message. Press twice to go back to the previous message. If playback is interrupted for over a minute, the answering machine returns to idle status. Deleting messages You can either delete all old messages together or individually. Deleting all old messages During playback or pause: Options Delete Old List OK Press the display key to confirm the prompt. Yes Press the display key to confirm the prompt. Deleting individual old messages During playback or pause: Delete Press the display key. Picking up a call from the answering machine You can pick up a call while the answering machine is recording or is being operated via remote operation: c / Accept Press the talk or display key. Recording stops and you can speak to the caller. If two seconds of the call have already been recorded when you pick it up, the call is displayed as a new message. You can answer the call, even if it is not signalled on the handset. 49 Marking a message as "new" A previously played back "old" message is displayed as a "new" message again. During message playback: * Press the star key. Mark as New Select and press OK. Operating the Gigaset S795 base answering machine Diverting an external call to the answering machine You can divert an incoming external call to the answering machine, even if it is deactivated. Prerequisite: Sufficient memory space is available on the answering machine. An external call is signalled on the handset: Select display key. The answering machine starts immediately in Answer & record mode and records the call. The set time for ring delay ( page 50) is ignored. call screening Activating/deactivating While a message is recording, you can screen calls via the base loudspeaker and registered handsets. Activating/deactivating two-way record You can record an external call with the answering machine. Inform the caller that the call is being recorded. Two-way record is indicated on the display by an advisory text and is added to the answering machine list as a new message. End Press the display key to stop two-way record. The maximum recording time depends on the memory available on the answering machine. If the memory is full, you will hear an end tone, the recording is aborted, and the call recorded up to that point is listed in the answering machine list as a new message. v Call Screening Handset / Base (= on) Change Select display key to activate/ deactivate the function. Call screening can be simultaneously activated on the base and handset. Permanently activating/deactivating call screening Deactivating call screening for the current recording You can deactivate the function for your own handset during the recording. Silence Press the display key. parameters Setting the recording The answering machine has already been preset at the factory. Individual settings can be adjusted using the handset. [. . . ] 29 Handset operating time in room monitor mode . 54 E-mail address copying from the directory . 28 Entry saving, changing (preselection) . 50 F Fast access answering machine . [. . . ]