User manual SIEMENS GIGASET 3000 MICRO

[. . . ] EN Dear Customer, Gigaset Communications GmbH is the legal successor to Siemens Home and Office Communication Devices GmbH & Co. KG (SHC), which in turn continued the Gigaset business of Siemens AG. Any statements made by Siemens AG or SHC that are found in the user guides should therefore be understood as statements of Gigaset Communications GmbH. Sehr geehrte Kundin, sehr geehrter Kunde, die Gigaset Communications GmbH ist Rechtsnachfolgerin der Siemens Home and Office Communication Devices GmbH & Co. [. . . ] The handset automatically activates when the battery is inserted and when the handset is placed in the base station/charging unit. Activating/deactivating the keypad lock Key activation is ineffective when the keypad lock is enabled. To answer an incoming call, press the talk key D ­ the keypad lock is automatically disabled for the call. z To activate/deactivate, press and hold down for longer than 1 second. 9 Registering the handset You can change the display language* (see page 22). After doing this, switch your handset off and then on again. You must register a new handset at the base station before you can make any telephone calls. When you switch on your handset, the message 5HJLVWHU"appears. Step 1: · You must first prepare the Siemens base station: Gigaset 3010 Micro 3010/3015 3020, 3025 3030, 3035 ISDN models 1000/2000 models Step 2: · Now enter the following in the handset within one minute: <(6 Press the display key. Enter base PIN Preparing the base station Press the coloured key on the base station for approx. 10 seconds until you hear the signal tones. In the base station menu select registration option and confirm. Press the LED ­ flashes during registration. See above for appropriate successor models in the 3000 range, e. g. q Enter the base station's system PIN (factory setting: 0000) and confirm ­ unassigned internal numbers are displayed. Enter the required call number ­ the base name, e. g. %DVH, is displayed (no longer flashing). Your handset is now ready for use! ­ To register at multiple base stations or to change base names, see page 24. ­ To modify the internal call number: re-register your handset at the same base, see page 24. * English is the default factory setting 10 Making calls Making external calls P D Enter the call number. Ending a call: Press the end call key B. ­ You can cancel the dial operation with the end call key B. ­ You can enter a pause with the recall key 4 (hold down key). ­ You can opt to not save entries, e. g. when controlling external telephone services: press the menu key , select 6ZLWFKWR7RQH and confirm with= ­ none of the numbers entered afterwards will be saved. Direct internal dialling , 17 e. g. q Press the display key ­ your own internal number is displayed. [. . . ] Refer to the appropriate operating instructions. User options (short cuts) Base station user options Only available with Gigaset 3000 base stations!Refer to the appropriate operating instructions. Handset user options (handset short cuts) You can save multiple operating steps (inputs) as a handset "short cut" and assign an appropriate name to it. You can edit and copy short cuts via the supplementary menu 9 in the same way as directory entries. Saving handset user options: <Ö2. Ö 9 <Ö2. Ö Name Press the menu key. [. . . ]