User manual SIEMENS GIGASET 5030

[. . . ] 11 1 GB Gigaset 5030 Quick Guide 9 10 11 12 13 1 Display symbols ‡ 8 7 6 5 4 3 2 Shift key pressed Microphone off t Loudspeaker on è Baby Call (direct call) on ‰ (Flashing) No power supply { Telephone locked Additional services from public network providers: New call in calls list › Repeated call ‹ A new message has arrived † A new SMS has arrived Š SMS memory full ë Call waiting on ™ Call forwarding immediately on ˜ Call forwarding on no reply on — Call forwarding when busy on š Anonymous call on y | Safety precautions When installing, connecting and operating the telephone, always observe the following precautions: ◆ Only use the plugs and leads supplied. — Only connect the connecting lead to the socket/jack provided for that purpose. — Arrange the connecting lead where it will not cause accidents. ◆ Position the telephone on a non-slip surface. [. . . ] If the phone number is stored in the directory, the assigned name will be displayed instead of the phone number. B AB Scroll through the calls list: Dial the phone number: At the selected entry, press the OK key. Lift the handset if you want to talk via the handset. delete individual entries Deleting entries in the calls list A. C Scroll through the calls list to the desired entry. B AB Delete all entries at the same time In the calls list, press the OK key. Picking up a waiting call If you receive a call during another call, you will hear the call waiting tone in the handset. If the phone number is transmitted, it (or the corresponding directory entry, if available) will appear on the display. You can switch back and forth between the current call and the waiting call using the key sequence >2. Depending on your network provider this key sequence may vary. In doubt, contact your network provider Activating/deactivating display of the prefix You can set the telephone so that the prefix is not displayed for incoming calls. This can be useful, for example, if you cannot see the last digits of a long phone number on the display. You can deactivate the display for one area code (up to 6 digits). Calls list The calls list includes up to 50 entries. If a subscriber calls several times, › appears in the display. Sequence of list entries: The most recent call is displayed in the first position (position number "01"). Older entries are moved downwards with each new incoming phone number until they are deleted from the list. In the calls list, you can ◆ scroll through the phone numbers displayed ◆ delete entries ◆ Save phone numbers from the calls list to a repertory key or in the Directory (see page 4) ◆ dial a displayed phone number directly. f ¢ SMS/CLIP Setup ¢ Area Code o >. > B Entering the prefix: Enter a one to six-digit prefix (without the enquiry call key). Deleting the prefix: You can delete the emergency number one character at a time using the R-key Press the OK key. Activating/deactivating the display of incoming phone numbers during a call The CLIP display of incoming phone numbers during a call can be activated or deactivated. [. . . ] — When you send text messages, your sender number may be sent without your extension number. In this case, the recipient cannot reply to you directly. Sending and receiving SMS on ISDN PABXs is only possible via the MSN number assigned to your telephone. Activating/deactivating the SMS function When you switch off you cannot send or receive any text messages with your phone. [. . . ]