User manual SIEMENS GIGASET 5040

[. . . ] Sensor To get the optimum viewing angle you can adjust the display to an angle of 0° - 60°. In setting mode Telephone locked Baby Call (direct call) activated Microphone off Handsfree on Number indicated in calls list called more than once Power on On: Proximity sensor activated Flashing: Proximity sensor and automatic call pick-up activated Phone number Call duration Entry mark when setting (e. Volume) Recall key pressed Pause Ready for use No memory content When trying to connect: telephone locked 1 Name keys 2 Automatic call pick-up key* 3 Star key / Proximity sensor key* 4 Hash key / Telephone lock key* 5 Recall key / Set key* 6 Loudspeaker key (handsfree) 7 Mute key 8 Redial key 9 Calls list key / Visual display of incoming calls 10 Loud key / Up key 11 Quiet key / Down key * Keys can have two functions. Hold down key for at least 1 second to use the function marked with an asterisk. [. . . ] This also applies to numbers within your own local telephone network. Press the Name key for the number you want to call. Lift the handset if you want to talk via the handset. Answering a call via a Name key A Name key flashes when a call comes in from the stored phone number. Prerequisite: Proximity sensor and automatic call pickup are activated (see "Activating/deactivating the proximity sensor" on page 5) and "Activating/deactivating automatic call pick-up" on page 5). Note: An automatically answered call is ended like any other call in handsfree mode (see page 4). If automatic call pick-up is not activated: After an incorrect entry, simply replace the handset if it is off the hook or pick it up if it is on the hook. The proximity sensor recognises when someone approaches the telephone and automatically activates the display and key lighting. Hold down the Proximity sensor key to activate/deactivate the function. The display shows the symbol when the proximity sensor is activated. Press the Name key if the caller is stored and the Name key is flashing. Press the Loudspeaker key to talk handsfree. Lift the handset if you want to talk via the handset. An incoming call from a number stored under one of the Name keys is automatically answered via the handsfree function when someone approaches the telephone. Prerequisite: the proximity sensor is activated and the number is stored correctly (including area code) under the name key (see page 4). Note: An automatically answered call is ended like any other call in handsfree mode (see page 4). Hold down the Automatic call pick-up key to activate/deactivate the function. When the automatic call pick-up function is activated, the symbol for the proximity sensor (OE) flashes in the display. Returning a call via a Name key A Name key is lit up if a call from the stored phone number came in. Lift the handset if you want to talk via the handset. The light goes out without the call being returned. The volume of the ringer can be set to one of 4 levels and can also be deactivated completely (default setting: level 4). [. . . ] The date and time of the displayed entry is displayed with the number of calls (on the right). Back to the calls list (calling number display): Press the Hash key again. dial the phone number: Press the Loudspeaker key. Lift the handset if you want to talk via the handset. [. . . ]