User manual SIEMENS GIGASET A155

[. . . ] EN Dear Customer, Gigaset Communications GmbH is the legal successor to Siemens Home and Office Communication Devices GmbH & Co. KG (SHC), which in turn continued the Gigaset business of Siemens AG. Any statements made by Siemens AG or SHC that are found in the user guides should therefore be understood as statements of Gigaset Communications GmbH. Sehr geehrte Kundin, sehr geehrter Kunde, die Gigaset Communications GmbH ist Rechtsnachfolgerin der Siemens Home and Office Communication Devices GmbH & Co. [. . . ] 2 The caller has asked the network provider for his number to be identified (CLI). The charge status of the batteries appears at the top right of the display: batteries flat S batteries 1/3 charged < batteries 2/3 charged OE batteries fully charged The handset is already registered with the base station. You must set the date and time to ensure that the times of calls are logged correctly (page 7). Your telephone is now ready to use. 4 In the display you will see EXTERNAL if you have not requested Calling Line Identification, WITHHELD if the caller has withheld CLI or UNAVAILABLE if CLI has not been requested. Speed dial list You can store up to ten numbers e. g. The speed dial list will be displayed with entries SHORTCUT 1, SHORTCUT 2 etc. Shortcuts that have already been assigned are marked . Pressing j again displays the name stored in the directory. Using the directory and other lists Directory You can store up to 20 numbers and associated names. The following functions are available: NEW ENTRY SHOW NUMBER USE NUMBER EDIT ENTRY DELETE DELETE ALL Storing a telephone number in the speed dial list j ¢ SHORTCUT¢ OK xw OK Save new phone number. Return to directory with the i key. Select the required entry from the speed dial list. Select the required entry or enter the first letters of the name. The shortcut is marked . Use phone number to dial. Delete all entries. xw~ OK Speed dialing For example, press and hold key I. If you select SHOW NUMBER the first 12 digits of the phone number are displayed. For long numbers: press w or x to display the first or last part of the number. Last number redial list This list contains the ten last dialled numbers. If the number is already saved with a name in the telephone book, the name of the caller is displayed. The following functions are available: Storing a number in the directory h¢ j ¢ NEW ENTRY ¢ ~OK ~OK a Enter phone number and confirm. Press and hold (back to idle status). COPY TO DIR SHOW NUMBER Store number in directory. Press the i button to return to the last number redial list. Delete entire list. Table for text/numerical entry: see page 9. Backspace delete one character at a time: press i key. USE NUMBER DELETE DELETE ALL Dialing with the directory h xw~ c Open directory. Select the required entry or enter the first letters of the name. Press the talk key. Dialing a number You can select a number from the last number redial list: c¢ Select entry with xw¢c. 5 Calls list The numbers of the last 10 missed calls are stored. Set the date and time (page 7) so that the time of the call can be shown in the display. When the phone is in idle status, new missed calls are indicated by a flashing Ü. [. . . ] For personal advice on our range of products, call United Kingdom: 0906 9597555 0. 75 £/minute You can talk to qualified Siemens technicians who will guide you expertly through product information and installation. If your Siemens device needs repair or if you have a guarantee or warranty claim, you can get fast, reliable help from our Service Centres. Service-Centre United Kingdom: 08705 334411 Please have your proof of purchase ready when calling. Replacement or repair services are not offered in countries where our product is not sold by authorised dealers. Authorisation This device is intended for analogue phone lines in the UK. Country-specific requirements have been taken into consideration. [. . . ]