User manual SIEMENS GIGASET A245

[. . . ] EN Dear Customer, Gigaset Communications GmbH is the legal successor to Siemens Home and Office Communication Devices GmbH & Co. KG (SHC), which in turn continued the Gigaset business of Siemens AG. Any statements made by Siemens AG or SHC that are found in the user guides should therefore be understood as statements of Gigaset Communications GmbH. Sehr geehrte Kundin, sehr geehrter Kunde, die Gigaset Communications GmbH ist Rechtsnachfolgerin der Siemens Home and Office Communication Devices GmbH & Co. [. . . ] Speed dial list: Can store up to 8 numbers (12 digits max. ), e. g. private phone numbers, prefixes of network providers ("Call-by-Call") etc. Press the h or C key to open the required list then press MENU. The following functions are available: USE NEW ENTRY NUMBER DELETE ¢ ¢OK, Answering a call Your handset rings and you wish to take the call: Press the talk key c. If "Auto Answer" (page 8) is active, just lift the handset out of the charging cradle. Calling Line Identification When you get a call, the caller's number will be displayed on your handset; the caller's name will be displayed if it is stored in the directory . Requirements: 1 You have asked your network provider for the caller's number (CLIP) to be displayed on your handset screen. 2 The caller has asked the network provider for his number to be identified (CLI). In the display you will see if you have not requested Calling Line Identification, WITHHELD if the caller has withheld CLI or UNAVAILABLE if CLI has not been requested. Add/edit number and use to dial Save new phone number Show/edit number Delete a single entry Clear the list: h/C¢MENU¢L ¢OK. Storing a number in the directory/speed dial list h/C¢ MENU ¢ NEW ENTRY ~OK ~OK Enter phone number and confirm. Speed dial: Enter the digit of the required speed dial key (2­9), then enter the name and confirm. Long press (back to idle status). a Table for text/numerical entry: see page 8. Cursor control: see page 1. 4 Dialling with the directory h ~ s c Open the directory. If there is more then one entry, select the name. Press the talk key. Û Select an entry (see above)¢ MENU. The following functions are available: DELETE COPY TO DIR TIME STATUS DELETE LIST Using the calls list ¢ Delete an individual number Store a number in the directory. Enter name Establish date and time of a call Read or not read Delete complete calls list Speed dialling Example: Press key I long ¢c. Last number redial list This list contains the five last dialled numbers. The following functions are available: ¢ Calling back a caller from the calls list: Û Select an entry c. ¢ ¢ USE COPY TO DIR Add/edit number and use to dial Answering machine in the base of the Gigaset A245 The answering machine is operated from the handset. The recording time cannot be displayed until you have set the date and time (see the Menu Tree, page 11). Clear the list: Þ ¢MENU¢L ¢OK. ¢ Store number in directory Dialling a number You can select a number from the last number redial list: Þ Select an entry c. ¢ Activating/deactivating the answering machine Your answering machine is activated and ready for use as soon as your handset has been set up. Until you have recorded your own personal announcement, the stored pre-recorded announcement will be used. MENU ANS MACHINE OK OK (= On). MACHINE Calls/answering machine list/network mailbox list Press the display key Û to open the calls list, answering machine list and network mailbox list (see Menu Tree, page 11). Calls list: The number of the last 30 missed calls are stored. When the phone is in idle status, new missed calls are indicated by a flashing Û . [. . . ] The table below contains a list of common problems and possible solutions. Problem Cause Solution Nothing The handset is not Press the end call appears in the switched on. 5 seconds or place the handset in the charger. Charge/replace the Battery pack is battery pack (page 2). [. . . ]