User manual SIEMENS GIGASET A345

[. . . ] EN Dear Customer, Gigaset Communications GmbH is the legal successor to Siemens Home and Office Communication Devices GmbH & Co. KG (SHC), which in turn continued the Gigaset business of Siemens AG. Any statements made by Siemens AG or SHC that are found in the user guides should therefore be understood as statements of Gigaset Communications GmbH. Sehr geehrte Kundin, sehr geehrter Kunde, die Gigaset Communications GmbH ist Rechtsnachfolgerin der Siemens Home and Office Communication Devices GmbH & Co. [. . . ] Confirm (On = ´). Internal barge-in Requirement: a handset is conducting an external call. The display on both handsets shows CONFERENCE. Ending a conference: press end call key. Only one handset can barge in on an external call. Handset paging If you have mislaid your handset, you can page it with the help of the base. Press the paging key on the front right of the base and all registered handsets will ring for 30 seconds. Ending search prematurely: press the paging key on the base or the talk key on the handset. 8 Registering Gigaset A34 handsets manually You can register up to three Gigaset A34 handsets on your Gigaset A345 Internal calls cannot be made. After registration, the handset reverts to idle status and you hear the confirmation tone. Gigaset A34 handset on Gigaset A base345 Manual registration is necessary if: N automatic registration was unsuccessful, N the handset supplied has been replaced, N the base has been restored to its factory settings. Step 1: Open the menu. REGISTER HS BASE Select the menu item and confirm. *--*--* appears in the display. Step 2: Place handset on the base. Gigaset A34 handset on other GAP bases Step 1: Set the base to a status where it is ready for registration (see operating manual for the base). Step 2: Open the menu. REGISTER HS GAP 1 Select the menu item and confirm. Enter the registration PIN for the GAP base that is ready for registration (e. g. Confirm. 9 Handset settings Handset volume You can set the handset volume by pressing the and a call, or after first pressing and holding the talk key. keys either during Ringer volume and ringer melodies Open the menu. either . . . RINGER VOL SET LEVEL 3 Set the ringer volume: Confirm. Select level (1­5) or CRESCENDO (grows louder) and confirm. Set the ringer melody: Select the menu item and confirm. Select desired melody (1­10) and confirm. and keys to set the ringer volume while the phone or . . . MELODY MELODY 4 You can also use the is ringing. Date/time Open the menu. DATE SET Select the menu item and confirm. Enter hours--minutes and confirm. CLOCK SET 10 Time setting for day/night function You can switch the ringer on your telephone off and on again with the key. You can also switch the ringer on again automatically at a specific time by programming the D/N TIMER function as follows. Requirement: the date and time have already been set. Open the menu. D/N TIMER Select the menu item and confirm. [. . . ] N The duration of the Guarantee shall not be extended by services rendered under the terms of the Guarantee. N Insofar as no Guarantee default exists, Siemens reserves the right to charge the customer for replacement or repair. N The above provisions do not imply a change in the burden of proof to the detriment of the customer. To invoke this Guarantee, please contact the Siemens telephone service. [. . . ]