User manual SIEMENS GIGASET A400H

[. . . ] AL410H (Puma glossy) / IM4 eng / A31008-M2267-R151-1-4N19 / Overview. fm / 20. 09. 2012 1 Gigaset AL410H The handset at a glance 1. Charge status of the batteries (¢ P. Control key (p) t: Open the menu for setting the volume (¢ P. 8) u: Display the list of registered handsets v: Microphone off (¢ P. [. . . ] In most cases, simply resetting this device will remedy the situation: ¤ Briefly disconnect the PABX power plug. Re-insert the plug and wait for the device to restart. If the caller number is still not displayed: ¤ Check the CLIP settings of your PABX and activate this function if necessary. You do not have to make any other settings on your Gigaset telephone. However, if the caller's number is not displayed, this can be due to the following: u You have not ordered CLIP from your network provider u Your telephone is connected via a PABX or a router with an integrated PABX (gateway) that does not transmit all information. Making internal calls Internal calls are free calls to other handsets that are registered to the same base. To make a call to other handsets, press u u ¤ q ( Select internal number of handset) or ~ (Enter internal number directly) ¤ OK, the handset is called or u u ¤ Call All ¤ OK all handsets are called (alternatively you can also press and hold the control key u or press u ¤ P). To end the call, press the end call key a. AL410H (Puma glossy) / IM4 eng / A31008-M2267-R151-1-4N19 / main. fm / 20. 09. 2012 8 Using the directory and lists Directory To open the directory: press and hold the bottom of the control key s. You can save up to 80 phone numbers (max. 32 digits) with corresponding names (max. 10). Using speed dial keys You can assign directory entries to the keys 0 and 2-9: to assign the entry) s ¤ q (Select entry) ¤ Menu ¤ Shortcut ¤ OK ¤ ~ (Press the key to which you want To dial, press and hold the required speed dial key. Transferring the directory to another handset Prerequisites: u The sending and receiving handsets must both be registered to the same base. u The other handset and the base can send and receive directory entries. Saving the first number in the directory s ¤ New Entry?¤ OK ¤ ~ (Enter number) ¤ OK ¤ ~ (Enter name) ¤ OK Saving a number in the directory s ¤ Menu ¤ New Entry ¤ OK ¤ ~ (Enter number) ¤ OK ¤ ~ (Enter name) ¤ OK Selecting a directory entry Open the directory with s. You have the following s ¤ q (Select entry) ¤ Menu ¤ Send Entry / Send List ¤ OK ¤ ~ (Enter the internal number of the receiving handset) ¤ OK Using the redial list This list contains the last ten numbers dialled. options: u Use s to scroll through the entries until the required name is selected. u Enter the first character of the name, if necessary scroll to the entry with the s key. Dialling from the redial list Press Þ or c (briefly) ¤ q (Select entry) ¤ c Managing entries in the redial list Press Þ or c (briefly) ¤ q (Select entry) ¤ Menu You can select the following settings: Use Number Dialling with the directory s ¤ q (Select entry) ¤ c Using other functions s ¤ q (Select entry) ¤ Menu New Entry Show Number Show Name Edit Entry Use Number Edit or add to the number. Then dial or select other functions from the Menu. Delete all entries. The following functions can be selected with s: Save new phone number. Then dial or select other functions from the Menu. Send a single entry to another handset (¢ P. Send the complete directory to another handset (¢ P. For speed dial, assign the current entry to a key. Copy to Dir. Delete Entry Delete List Using other lists Depending on the base, your telephone has the following: u Answering machine list u Network mailbox list u Calls list when you press f, the list selection opens. You can scroll through the available lists. [. . . ] 1900 545 416 Please have your record of purchase ready when calling. Replacement or repair services are not offered in countries where our product is not sold by authorised dealers. AL410H (Puma glossy) / IM4 eng / A31008-M2267-R151-1-4N19 / main. fm / 20. 09. 2012 12 Authorisation This device is intended for use worldwide. Use outside the European Economic Area (with the exception of Switzerland) is subject to national approval. Country-specific requirements have been taken into consideration. [. . . ]