User manual SIEMENS GIGASET A580 IP

[. . . ] Be aware of the technical conditions in your particular environment, e. g. Do not hold the rear of the handset to your ear when it is ringing or when the handsfree function is activated. Otherwise you risk serious and permanent damage to your hearing. The handset may cause an unpleasant humming noise in hearing aids. [. . . ] if DHCP is not enabled on the router) you will have to assign a static IP address to the base station for LAN access. You must enter this IP address on the handset before carrying out the following steps. Further information can be found in the user guide on the enclosed CD. The following handset menu can be used to make the entry: Menu m Settings Base Local Network (enter system PIN) > The battery charging status is displayed in the idle display: = e V U (flat to full). > IP should be set as the default line for your phone (default setting). You will then immediately receive corresponding messages if a connection to the provider's VoIP server cannot be established due to incorrect/incomplete data. Saving VoIP access data 9 8 Saving VoIP access data Starting the connection assistant, entering the PIN Start VoIP connection wizard?No Yes System PIN: [____] 10 9 Saving VoIP access data Entering an auto-configuration code Code: 11 Saving VoIP access data 11 Entering VoIP account data 12 Instead of using the following procedure, you can also enter the VoIP access data using your PC (steps 7 to 11 ): > Enter your auto-configuration code using the keypad (max. 32 characters). Username: > Launch the Web browser on your PC. > Enter the URL http://www. gigaset-config. com in the address field of the Web browser and press the return key. You are connected to your base station's Web configurator. You can find a description of the Web configurator in the user guide on the enclosed CD. If your VoIP provider does not require a username, this step can be skipped. OK OK > Press the right-hand display key OK. All data necessary for VoIP telephony is loaded directly from the Internet to your phone. Following successful download, Saved is shown in the display. T OK > Using the number keys, enter your username (user ID) that you received from your VoIP provider. This entry is case-sensitive. > Press the right-hand display key OK. Precondition for the following steps: Before you can use VoIP to phone any other subscribers on the Internet, the fixed line network or the mobile phone network, you need a VoIP account. > Press the key below Yes on the display (= right display key). > Using the number keys, enter the base station's system PIN. By default, the PIN is "0000". 10 > To switch between upper and lower case and digits, press the # key (several times if nec- > Set up a VoIP account with a VoIP provider. > Have the VoIP account data you received from your VoIP provider to hand. > Press the right-hand display key OK. If the connection assistant does not start properly, you can start it via the menu: Menu m Settings Base Telephony Connection Assistant Selecting a provider and loading provider data to the base station Select provider is displayed briefly in the display. A list of providers is loaded and the first provider is shown in the display. essary). > Characters entered incorrectly can be deleted using the left display key X. The character to the left of the cursor will be deleted. You will need: > Your registration name (login ID), your password and, if applicable (provider-dependent), a user name (often this is your VoIP phone number). Or Select country is displayed briefly in the display. A list of countries is loaded and the first country in the list is shown in the display. > You can navigate within the input field using the control key p (press up/down). Provided that your phone is set for auto-configuration (default setting), you will see the following display. Germany Provider 1 OK Authentication Name: OK Authentication Password: V V > Your personal auto-configuration code (activation code), if your provider supports "automatic configuration". If you have received an autoconfiguration code: Do you have a code for auto configuration?No Yes T OK T OK 7 Starting the configuration process When your handset is sufficiently charged (approx. [. . . ] > When prompted, speak into the microphone on the handset. If you hear your own voice, your base station is connected to the Internet. If you do not hear your voice, check your phone and router settings. In the user guide on the enclosed CD, you will find detailed information about setting up and operating your phone, as well as possible solutions to frequently asked questions and common problems. Issued by Gigaset Communications GmbH Frankenstr. 2a, D-46395 Bocholt Manufactured by Gigaset Communications GmbH under trademark license of Siemens AG. [. . . ]