User manual SIEMENS GIGASET C285

[. . . ] C285 Gigaset Communications GmbH Frankenstr. 2a, D-46395 Bocholt Manufactured by Gigaset Communications GmbH under trademark license of Siemens AG. 2011 Gigaset products bearing the trademark 'Siemens' will exclusively use the trademark 'Gigaset'. © Gigaset Communications GmbH 2010 All rights reserved. [. . . ] ¤ After the beep press the G key to activate the answering machine. Or 24 Using the voice mailbox beeps (=the end of message playback) ¤ Press the G key to activate the answering machine. u If no (new or old) messages are stored on the answering machine: You will hear a beep. A status message is played back and informs that no messages are stored on the answering machine. ¤ Press the G key to activate the answering machine. The answering machine is now activated on the corresponding line and the activated announcement is played back. ¤ Listen to the playback until you hear two Configuring the voice mailbox for fast access Entering the voice mailbox number §Menu§ Enter the number of the voice mailbox and press §OK§. The setting for fast access applies to all handsets. If your network voice mail requires a password for access, it is possible to add a password by entering pauses (press the k key) immediately after entering the mailbox access number and before entering your password. ~ ¢ Voice Mail ¢ Settings ¢ Line 1 / Line 2 Deactivating the answering machine ~ Dial the number of the line you want to deactivate answering machine for. ;~ While listening to the announcement, press the ; key and enter the system PIN (default setting: 0000, see page 31). Your answering machine is now deactivated. Using the voice mailbox The voice mailbox is your telephone network provider's answering machine within their telephone network. You cannot use the voice mailbox unless you have requested it from your network provider. ¢ Voice Mail ¢ Call VM Line 1 / Line 2 Select which mailbox you want to call and press §OK§. If you have new messages in your voice mailbox: §Call§ Press the display key to call the voice mailbox. d Press the Handsfree key d, if required. You hear the voice mailbox announcement. If you have new messages only for one voice mailbox, the respective mailbox is immediately called. If you have new messages for both voice mailboxes: When using a handset: Line 1 / Line 2 Select the line and press §OK§ . When using the base station: Line 1 / Line 2 Press the respective display key to start the call. For further operation steps, please refer to the instructions provided by your mailbox operator. §Menu§ Calling your voice mailbox 25 Using several handsets Using several handsets Registering and de-registering handsets You can register up to six handsets with your base station. A Gigaset C28H handset can be registered with up to four base stations. q §OK§ Select the handset you want to de-register and press §OK§. Press the display key to confirm deletion. Locating a handset ("paging") You can locate your handset using the base station. ¤ Press the Registration/Paging key ÷ on the base station briefly. ¤ All handsets will ring at the same time ("paging"), even if the ringers are switched off. [. . . ] © Gigaset Communications GmbH 2009 All rights reserved. We reserve the right, to make changes without notice in equipment design and/or components. Part Number: A31008-M1973-R401-1-5819 © Copyright 2009. 40 Menu of the handset Menu of the handset * Directory <directory list> View New Entry Edit Entry Delete Delete List Answer Machine Play Line 1 Line 2 Ans On/Off Line 1 On Off Line 2 On Off Answer Mode Line 1 Answer & Rec. Answer Only Record OGM Line 1 Answer & Rec. [. . . ]