User manual SIEMENS GIGASET C300A

[. . . ] C300 - C300 A Gigaset Communications GmbH Frankenstr. 2a, D-46395 Bocholt Manufactured by Gigaset Communications GmbH under trademark license of Siemens AG. 2011 Gigaset products bearing the trademark 'Siemens' will exclusively use the trademark 'Gigaset'. Gigaset Communications GmbH 2010 All rights reserved. [. . . ] All handsets will ring simultaneously (paging), even if the ringtones are deactivated. Ending paging 2) On the base Within 60 seconds, press and hold the registration/paging key on the base ( page 5) (approx. 3 seconds). Briefly press the registration/paging key on the base or press the talk key c on the handset. Changing the base Registering other handsets You can manually register other Gigaset handsets and handsets for other devices with GAP functionality as follows. If your handset is registered to more than one base, you can set it to a particular base or to the base that has the best reception (Best Base). Menu Settings Registration Select Base s Select one of the bases or Best Base and press OK. 41 1) On the handset Start to register the handset as described in its user guide. Using multiple handsets Making internal calls Internal calls are free calls between handsets that are registered with the same base. Either a Press the end call key. The external call is transferred to the other handset. Calling a specific handset u ~ Or: u s c Initiate internal call. Press the talk key. Or Back Calling all handsets (group call) u Press and hold. All handsets are called. Press the display key. You are reconnected with the external participant. When transferring a call, you can also press the end call key a before the internal participant answers. Then, if the internal participant does not answer or the line is busy, the call will automatically return to you. Accepting a waiting call If you receive an external call during an internal call, you will hear the call waiting tone (short tone). With Caller ID, the caller's number or name will appear in the display. a Press the end call key to end the internal call. c Press the talk key to accept the external call. Ending a call a Press the end call key. Listening in to an external call (conference) Prerequisite: The Listening in function must be activated. An internal participant can listen in on this call and take part in the conversation. All the participants are made aware of additional listeners by a signal tone. Transferring a call to another handset/making an internal consultation call You are talking to an external participant and can call an internal participant at the same time to forward the call or to consult. The external participant hears music on hold, if activated ( page 46). s Select a handset or Call All and press OK. When the internal participant answers: If necessary, announce the external call. Activating/deactivating listening in Listening in Press OK to activate/deactivate the function ( = on). Menu Settings Telephony 42 Handset settings Internal listening in The line is busy with an external call. Your screen will display information to that effect. During this time, this handset displays the Add 2nd message and it is not possible to dial another number from this handset. If the first internal participant presses the end call key a, the handset that has "listened in" remains connected to the external participant. Handset settings Your handset is preset, but you can change the settings to suit your individual requirements. Quick access to numbers You can assign a number from the directory to each of the digit keys Q and 2 to O. [. . . ] 2a, D-46395 Bocholt Manufactured by Gigaset Communications GmbH under trademark license of Siemens AG. Gigaset Communications GmbH 2010 All rights reserved. We reserve the right, to make changes without notice in equipment design and/or components. Part Number: A31008-M2203-R301-1-3S19 Copyright 2010. 8. [. . . ]