User manual SIEMENS GIGASET C360

[. . . ] 1 Gigaset C360 Handset for C36H Base station 1 Charge status of the 1 battery pack 2 2 Internal number of the handset 3 Display keys 4 Message key 5 Handsfree key 3 6 Control key 4 7 Talk key 5 6 8 Directory key 7 9 End call and 8 On/Off key 10 Ringtone on/off (press 9 and hold in idle status) 11 Key lock on/off (press and hold) 12 Recall key 10 - Confer (flash) 11 - Dialling pause 12 (press and hold) 13 13 Microphone 14 14 Alarm clock key 2 11. 12. INT 11:56 MENU V Registration/Paging key (page 6/page 6 Display keys: Pressing the keys launches whichever function that appears above them in the display. Display icon Function when pressed Call all registered handsets. Open main/submenu (see Menu tree, page 9). [. . . ] After a time its charge capacity will decrease for technical reasons. You must set the date and time to ensure that the times of calls are logged correctly (see Menu tree, page 9). Once the phone is registered and the time set, the idle display looks as shown on page 1. Displaying the caller's phone number When you get a call, the caller's phone number will be displayed on your handset; or the caller's name will be displayed if it is stored in the directory or if CNIP has been requested. Requirements: 1 You have asked your network provider for the caller's phone number (CLIP) or name (CNIP) to be displayed on your handset screen. 2 The caller has asked the network provider for his phone number to be identified (CLI). ® appears in the display if you have not requested Calling Line Identification, Withheld appears if the caller has withheld CLI, and Unavailable if CLI has not been requested by the caller. Handsfree talking Once you have entered the phone number you can immediately call in handsfree mode by pressing d (the d key lights up continuously). During a call you can switch between earpiece and handsfree mode by pressing d. Set the handsfree volume with u. 4 Operating the handset Activating/deactivating the handset Press and hold the end call key a. If you place a deactivated handset in the base station or charging cradle, it will automatically activate. The following functions can be selected with u: New Entry Show Number Use Number Add a new entry. Then dial or use other functions with MENU. Send a single entry to another handset (page 4). Send the complete list to another handset (page 4). For speed dial, assign the current entry to a key. Edit Entry Delete Entry Send Entry Delete List Send List Shortcut Using the directory and lists Directory To open the directory: press v . You can save up to 40 phone numbers (max. 32 digits) with corresponding names (max. Note: You can assign a number from the directory to a key for speed dial (page 4). Setting the shortcut key Saving the first number in the directory v ¢ New Entry?¢ OK ~ ~ Enter number and press OK. Enter name and press OK. MENU Scroll touShortcut Scroll u to select a number (0, 2-9), for example: Shortcut: 2 OK ¢ ¢ ¢ Using the shortcut key By pressing and holding the shortcut key, the relevant IP or VIP number will be dialled. (For example: press and hold key 2, the IP number will be dialled, then dial the long distance number) Saving a number in the directory v ¢ MENU ¢ New Entry ¢ OK ~ ~ Enter number and press OK. Enter name and press OK. Sending the directory to another handset Preconditions: The sending and receiving handsets must both be registered to the same base station. The other handset and the base station can send and receive directory entries. lowing options: Use u to scroll to the entry until the required name is selected. Enter the first character of the name or scroll to the entry with u, if required. Selecting a directory entry Open the directory with h or v. [. . . ] ) @ 5x ¥ 0 < \ 6x ¤ + = & . * Abc--> 123 If the handset has come into contact with liquid: 1. Switch off the handset and remove the battery pack immediately. Allow the liquid to drain from the handset. [. . . ]