User manual SIEMENS GIGASET C45

[. . . ] EN Dear Customer, Gigaset Communications GmbH is the legal successor to Siemens Home and Office Communication Devices GmbH & Co. KG (SHC), which in turn continued the Gigaset business of Siemens AG. Any statements made by Siemens AG or SHC that are found in the user guides should therefore be understood as statements of Gigaset Communications GmbH. Sehr geehrte Kundin, sehr geehrter Kunde, die Gigaset Communications GmbH ist Rechtsnachfolgerin der Siemens Home and Office Communication Devices GmbH & Co. [. . . ] Or: ¤ ¤ Press no key: after 2 minutes the display will return automatically to idle status. When the handset is in idle status Open the directory. s t Adjust the ringer melody volume of the handset (page 13). Changes which you have not confirmed/stored by pressing §OK§ will be rejected. For an example of the display in idle status, page 1. In lists and menus Scroll up/down line by line. t/s In an input field Move the cursor left or right. t/s 7 Operating the handset Menu management Your telephone's functions are accessed in a menu that has a number of levels. Belt clip and headset By using a belt clip and headset (optional) you can easily make your Gigaset C 45 a constant companion both inside the building and in its immediate vicinity. Main menu (first menu level) ¤ ¤ To open the main menu, press §Menu§ with the handset in idle status. Scroll to the function with the control key q and press §OK§. Attaching the belt clip There are notches for attaching the belt clip on the side of the handset at approximately the same height as the display. Press the belt clip to the back of the handset so that the lugs of the belt clip click into the notches. Accessing a function The corresponding submenu (the next menu level) is opened. ¤ Submenus The functions in the submenus are displayed as lists. Accessing a function: Scroll to the function with the control key q and press §OK§. The tongue of the belt clip must face the battery compartment. Connection socket for headset You can use headsets with jack connectors. The following models have been tested and are therefore recommended: HAMA Plantronics M40, MX100 und MX150. The call quality of other models cannot be guaranteed. ¤ A short press on the end call key a returns you to the previous menu level / cancels the operation. Correcting wrong inputs u Navigate to the incorrect input with the conu Press §<C§ to delete the character to the left of u Insert new character to the left of the cursor. u When entering the time and date etc. , edit the flashing character. trol key if û is displayed. You will find explanations for the symbols and typographical conventions used in this user guide in the appendix, page 15. 8 Making calls Making calls Making an external call External calls are calls using the public telephone network. Handsfree talking In handsfree mode you need not hold the handset to your ear but place it e. g. on the table in front of you to allow others to participate in the call. ~c Or: Enter the number and press the talk key. Press and hold the talk key c and then enter the number. Activating/deactivating handsfree Activating while dialling Enter the number and press the ~d c~ You can cancel the dialling operation with the end call key a. ¤ handsfree key. You should inform your caller before you use the handsfree function so that they know someone else is listening. Notes: ­ ­ ­ Dialling with the directory (page 10) or last number redial list (page 11) saves repeated keying of phone numbers. You can assign a number from the directory to a key for speed dialling (page 10). You can edit or add to any phone number selected by means of quick dialling or from the directory and use it for the current call. Switching between earpiece and handsfree mode d Press the handsfree key. Switch handsfree on and off during a call. If you wish to place the handset in the charging cradle during a call: Press the handsfree key d and hold it while placing the handset in the base station. If the handsfree key d does not light up, press the key again. ¤ End call a Press the end call key. To find out how to adjust the volume, see page 12. Answering a call The handset indicates an incoming call in three ways: it rings, there is a display on the screen and the handsfree key d flashes. You can take calls: Pressing the talk key c. If the handset is in the charging cradle and the Auto Answer function is activated (page 12), the handset will take a call automatically when you lift it out of the cradle. If the ringtone is intrusive, press §Menu§ Silent . [. . . ] Other characters To get round the alphabetical order of the entries, insert a space or a digit in front of the name. These entries will then move to the beginning of the directory. Names which you have preceded with an asterisk will move to the end of the directory. Writing and editing text The following rules apply when writing a text: u The cursor is controlled with t s. u Characters are added to the left of the cursor. [. . . ]