User manual SIEMENS GIGASET C460

[. . . ] EN Dear Customer, Gigaset Communications GmbH is the legal successor to Siemens Home and Office Communication Devices GmbH & Co. KG (SHC), which in turn continued the Gigaset business of Siemens AG. Any statements made by Siemens AG or SHC that are found in the user guides should therefore be understood as statements of Gigaset Communications GmbH. Sehr geehrte Kundin, sehr geehrter Kunde, die Gigaset Communications GmbH ist Rechtsnachfolgerin der Siemens Home and Office Communication Devices GmbH & Co. [. . . ] Press the display key. q: The following functions can be selected with Use Number (as in the directory, page 12) Copy to Directory Copy an entry to the directory (page 13). 13 Making cost-effective calls List entry Example of a list entry: New Call 1234567890 11. 11. 05 01/02 19:27 §Menu Example: You have entered 08 for "with preselection". Now all numbers that start with 08 will be dialled with preselection. However, if you want, for example, that 081 is still dialled without preselection, enter 081 for "without preselection". §Back§ u Status of entry In the calls list New Call: new missed call. u Entry number 01/02 means e. g. : first of a total of two entries. u Number or name of caller You can add the number of the caller to the directory (page 13). You can delete the current entry with §Menu§ Delete Entry. U Storing preselection numbers §Menu§ ¢ Settings ¢ Base ¢ Preselection ¢ Preselection Number ~ §OK§ Enter or edit preselection number (call-by-call number). Press and hold (idle status). a Saving or editing entries in the preselection lists Each of the two lists can contain 11 entries with 4 digits. Numbers may be prefixed according to the country in the "with preselection" list. This means, for example, that all national calls or calls to the mobile network are automatically linked to the preselection number you have stored previously. Deleting the calls list Caution!All old and new entries will be deleted. f ¢ Calls List: ¢ §Menu§ ¢ Delete List a Press and hold (idle status). Making cost-effective calls Make your calls via a network provider who offers very low call charges (call-by-call), have the call duration displayed on your handset after the call. ¢ Settings ¢ Base ¢ Preselection ¢ With Preselection / Without Preselection §Menu§ q ~ §OK§ Select entry and press §OK§. Enter or edit first digits of number. Press and hold (idle status). a Automatic network provider code (preselection) You can specify a call-by-call number (preselection number) which is automatically placed in front of certain numbers according to two lists when you dial them. u The list "with preselection" contains the "rule" for dialling code numbers or the first digits of dialling code numbers with which you wish the preselection number to be used. u The list "without preselection" contains the "exception to the rule". Temporarily cancelling preselection c (press and hold) Preselect off ¢ §Menu§ ¢ Automatic Permanently deactivating preselection ¤ Delete the preselection number with §<C§ and press §OK§. 14 Making cost-effective calls Displaying the call duration The duration of a call is displayed u during the conversation, u until about three seconds after the call has ended if you do not replace the handset in the charging cradle. Please note: The actual duration of the call can vary from that shown by a few seconds. 15 SMS (text messages) SMS (text messages) Your unit is supplied ready for you to send text messages immediately. s/~ Requirements: u Calling Line Identification (CLIP, page 9) is u Your network provider supports SMS in the fixed network (information on this can be obtained from your network provider). u You are registered with your service provider to send and receive SMS. enabled for your phone connection. Enter the number with prefix (including your local area code) from the directory or key it in manually, and press §OK§. For SMS to an SMS mailbox: put the mailbox ID at the end of the number. The SMS is sent. Please note: If you are interrupted by an external call while writing an SMS, the text is automatically saved in the draft message list. Text messages are exchanged between SMS centres that are operated by service providers. You must enter the SMS centre in the unit through which you wish to send and receive. You can receive SMS from every SMS centre that is entered if you have registered with your service provider. Your text message is sent through the SMS centre that is active (page 18). Only one SMS centre can be active at any one time. If no SMS centre is entered, the SMS menu only consists of the entry Settings. [. . . ] The display briefly shows whether upper or lower case letters or digits is selected when you switch from one mode to the next. The bottom text line displays "abc -> Abc", "Abc -> 123" or "123 -> abc". *) Directory and other lists **) When writing an SMS Order of directory entries The directory entries are usually sorted in alphabetical order. Letters (alphabetical) 29 Accessories Accessories Gigaset Handsets Upgrade your Gigaset to a cordless PABX: Gigaset Handset C46 u u u u u u u u u Illuminated colour display (4096 colours) Various different screensavers Illuminated keypad Handsfree operation Polyphonic ringer melodies Phonebook for around 100 entries SMS (CLIP must be enabled) Alarm clock Headset socket www. siemens. com/gigaset Only use original accessories. This will avoid possible health risks and damage, and also ensure that all the relevant regulations are complied with. 30 Index Index Numerics A 24 hours in advance (alarm clock) . [. . . ]